ISA 430 MKII is a preamplifier with the following features: 1.It can connect unbalanced instrument outputs, both on the rear panel and on the front panel. 2.It has a VU meter that can indicate input level, insert 1 return level, insert 2 return level, compressor gain reduction or listen level of the audio path. 3.It has a listen button that will automatically display the listen level on the VU meter.
The Focusrite ISA 430 MKII is a preamplifier with microphone, line, and instrument inputs, transformer-coupled impedance selection, phantom power, phase inversion, trim gain, and a post-mic output. Its front panel includes input gain controls, metering, EQ, and dynamics routing controls.
Metering includes a VU meter with selectable 0 VU calibration, digital bar meters for output and input levels, and an audio overload LED. The EQ module provides high-pass and low-pass filters plus two parametric bands, with routing options for the compressor and gate. This manual is written in Spanish.
| Nominal power consumption | 100-240 V, 50-60 Hz, 50 VA |
|---|---|
| Microphone input gain | 0 to +60 dB in 10 dB steps |
| Line input gain | -20 to +10 dB |
| Instrument input gain | +10 to +40 dB |
| Trim gain | 0 to +20 dB |
| Maximum microphone preamp gain with Trim | 80 dB |
| Phantom power | +48 V DC |
| High-pass filter range | 20 Hz to 1.6 kHz |
| Low-pass filter range | 400 Hz to 22 kHz |
| Filter slope | 18 dB/octave |
| Parametric EQ band 1 | 40-400 Hz |
| Parametric EQ band 2 | 600 Hz to 6 kHz |
| VU meter calibration | +4 dBu or +18 dBu |
| Digital meter range | -42 dBFS (-20 dBu) to 0 dBFS (+22 dBu) |
| Audio overload LED threshold | 6 dB below clipping |
It requires 100-240 V at 50-60 Hz and 50 VA.
Microphone gain ranges from 0 to +60 dB in 10 dB steps, with up to +20 dB additional Trim gain.
It increases the transformer impedance effect at high frequencies.
The first band covers 40-400 Hz and the second covers 600 Hz-6 kHz.