Micro Motion 2200S Transmitter Installation Manual

This manual describes the installation process for the Micro Motion 2200S Series transmitter


Micro Motion 2200S Transmitter Installation Manual - cover page
Brand
Micro Motion
Category
flow transmitter
Document type
Installation Guide
Language
Chinese
Pages
39
File format
PDF
File size
1.6 MB
Published
03 November, 2023
Updated
03 November, 2023
MD5 checksum
2712BD4E567072A7D930370E41AC3127

About this manual

This is the Chinese-language installation manual (P/N MMI-20012962, Rev. BA, February 2009) for the Micro Motion 2200S transmitter. It describes the procedures needed to install the transmitter, including preparation, model code explanation, mounting options (integral or extended), and positioning of the transmitter and user interface module.

The manual also covers installation considerations such as power requirements and barrier requirements, wiring with and without a safety barrier or Micro Motion adapter barrier, and an appendix of dimensions and specifications. Further appendices describe the Micro Motion adapter barrier and the return policy. This manual is written in Chinese.

What's inside

  • Preparation
  • Safety
  • Model code description
  • Flowmeter components and mounting structures
  • Transmitter installation overview
  • Installation considerations
  • Power requirements
  • Barrier requirements
  • Transmitter and barrier installation
  • Wiring

Specifications

EnclosureNEMA 4X (IP67); cast aluminum with polyurethane paint or 316L stainless steel
Conduit connections1/2" NPT or M20
MountingIntegral or extended mounting; can be rotated on the mounting bracket in 45° increments for eight positions
Power supplyDC 17–36 VDC, loop resistance up to 600 Ω, maximum power 0.8 W
Terminal wire size26–14 AWG (0.14–2.5 mm²), solid or stranded
Channel A outputOne passive 12–20 mA output; maximum load 600 Ω; external supply 17–36 VDC
Digital communicationHART Bell 202 at 1.2 and 2.2 kHz, 1200 baud, one stop bit, odd parity; requires 250–600 Ω resistance
Ambient temperature limitsOperating and storage: –40 to +140 °F (–40 to +60 °C)
Humidity limits5–95% relative humidity, non-condensing at 140 °F (60 °C)
Vibration limitsIEC 8.2.6, endurance sweep, 5–2000 Hz, 1.0 g, 50 sweep cycles

Frequently asked questions

What do the H and K characters in the 2200S model code mean?

H means the transmitter is supplied without a Micro Motion adapter barrier, and K means it is supplied with a Micro Motion adapter barrier.

What power supply does the 2200S transmitter require?

It requires DC 17–36 VDC with loop resistance up to 600 Ω and a maximum power of 0.8 W.

What mA output scaling is used with and without an adapter barrier?

Without an adapter barrier or third-party safety barrier the external device receives a 12–20 mA signal; with the Micro Motion adapter barrier installed it receives a 4–20 mA signal.

What are the ambient temperature limits of the transmitter?

Operating and storage temperature range is –40 to +140 °F (–40 to +60 °C).

Download PDF (1.6 MB)

More Micro Motion Manuals


View all Micro Motion manuals →