Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.
CRC error indicates a CRC error occurred in the communication data from the NC. The manual lists no action for this code.
Over voltage indicates the PN bus voltage is more than 400V. The manual lists no action for this code.
Power module error indicates an overcurrent was detected in the IPM used in the servo drive main circuit section. The manual lists no action for this code.
Overspeed indicates the motor speed reached 1.2 times the rated motor speed. The manual lists no action for this code.
Over regeneration indicates overheating of the regenerative resistor was detected. The manual lists no action for this code.
Communication error indicates communication with the detector was cut off, or the communication data was abnormal. The manual lists no action for this code.
Data error indicates an error was detected in the position per rotation in the detector. The manual lists no action for this code.
LED error indicates deterioration of the LED in the detector was detected. The manual lists no action for this code.
Scale CPU error means CPU in serial encoder on motor end has failed. The manual lists no action for this code.
Relative posn detect circuit err means hardware error occurred in relative position detection circuit of linear scale. The manual lists no action for this code.
Absolute posn detect circuit err means hardware error occurred in absolute position detection circuit of linear scale. The manual lists no action for this code.
Absolute position overspeed means scale moved at 45mm/s or faster during initialization. The manual lists no action for this code.
Abs posn detect scale CPU err means CPU in absolute position linear scale is not operating correctly. The manual lists no action for this code.
Unused axis error means power module error occurred on an excluded axis with rotary switch set to F. The manual lists no action for this code.
Absolute position lost means absolute position data from the detector was lost. The manual lists no action for this code.