Industrial

The MAX187/MAX189 are 12-bit serial analog-to-digital converters (ADCs) from Texas Instruments with 8.5µs sampling rate and 75ksps throughput rate. They support SPI™, QSPI™ and Microwire™ interface.

MAX1744/MAX1745 are high-voltage, step-down DC-DC controllers in µMAX capable of handling up to 36V inputs. These parts use a proprietary current-limited control scheme for excellent light- and full-load efficiency, while their 330kHz (max) switching frequency permits small external components for space-critical applications. Operation to 100% duty cycle permits the lowest possible dropout voltage. The MAX1744 contains an internal feedback network that provides a pin-selectable output voltage of either 3.3V or 5V. The MAX1745 uses an external feedback network to generate an adjustable output voltage between 1.25V and 18V. The MAX1744/MAX1745 are available in a space-saving 10-pin µMAX package.

The MAX1583 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board for evaluating the MAX1583 white LED flash boost converter. The EV kit accepts a 2.6V to 5.5V input voltage and drives up to five series white LEDs with a constant current to pro- vide camera flash/strobe in cell phones, PDAs, DSCs, and other hand-held devices. The MAX1583 switching frequency is 1MHz, allowing tiny external components. Two logic inputs control four modes of operation: shut- down mode (0.5µA max), movie mode for high-efficien- cy continuous lighting (programmable up to 100mA), precharge mode for charging a reservoir capacitor to 24V while the LEDs are off (POK output indicates a full reservoir capacitor), and strobe mode for firing the flash during an exposure with a regulated current program- mable up to 300mA (100mA with installed compo- nents). A pushbutton pulse generator is installed to sim- ulate a 30ms flash pulse. The MAX1583 comes with the MAX1583X (1A current limit) installed, but the entire MAX1583 family can be eval- uated with this EV kit with minor component changes.

The MAX1242/MAX1243 are low-power, 10-bit analog-to-digital converters (ADCs) available in 8-pin pack- ages. They operate with a single +2.7V to +5.25V supply and feature a 7.5µs successive-approximation ADC, a fast track/hold (1.5µs), an on-chip clock, and a high-speed, 3-wire serial interface. Power consumption is only 3mW (VDD = 3V) at the 73ksps maximum sampling speed. A 2µA shutdown mode reduces power at slower throughput rates. The MAX1242 has an internal 2.5V reference, while the MAX1243 requires an external reference. The MAX1243 accepts signals from 0V to VREF, and the reference input range includes the positive supply rail. An exter- nal clock accesses data from the 3-wire interface, which connects directly to standard microcontroller I/O ports. The interface is compatible with SPI™, QSPI™, and Microwire™. Excellent AC characteristics and very low power com- bined with ease of use and small package size make these converters ideal for remote-sensor and data- acquisition applications, or for other circuits with demanding power consumption and space require- ments. The MAX1242/MAX1243 are available in 8-pin DIP and SO packages. Applications Portable Data Logging Process Control Monitoring Test Equipment Temperature Measurement Isolated Data Acquisition

The MAX1065/MAX1066 are 14-bit, low-power successive approximation analog-to-digital converters (ADCs) that feature automatic power-down, a factory-trimmed internal clock, and a high-speed, 14-bit-wide (MAX1065) or byte-wide (MAX1066) parallel interface. The devices operate from a single 4.75V to 5.25V analog supply and a 2.7V to 5.25V digital supply. The MAX1065/MAX1066 use an internal 4.096V reference or an external reference. The MAX1065/MAX1066 consume only 1.8mA at a sampling rate of 165ksps with external reference and 2.7mA with internal reference. AutoShutdown™ reduces supply current to 0.1mA at 10ksps. The MAX1065/MAX1066 are ideal for high-performance, battery-powered, data-acquisition applications. Excellent dynamic performance and low-power consumption in a small package make the MAX1065/ MAX1066 the best choice for circuits with demanding power consumption and space requirements. The 14-bit-wide MAX1065 is available in a 28-pin TSSOP package, and the byte-wide MAX1066 is available in a 20-pin TSSOP package. Both devices are available in either the 0°C to +70°C commercial, or the -40°C to +85°C extended temperature range.

This document describes a product that is ISO 9001 certified and features an 8 diode array, a standard 16-pin dual-in-line package, and UL 94V-0 flammability classification. It has a maximum operating temperature of 1500°C, a minimum breakdown voltage of 90V, and a maximum continuous forward current of 400mA with a power dissipation of 500mW.

This document introduces the features and characteristics of the high-performance EE CMOS programmable logic of the MACH 1 and 2 CPLD families.

The MAC7100 family of microcontrollers are pin-compatible members of a family of 32-bit flash-memory based devices developed specifically for embedded automotive applications.

The product is an extremely low noise, high stability zener diode, suitable for power supply stabilization. The product has extremely low noise voltage (2.4V to 39V, 1/3 to 1/10 of conventional products), excellent rising performance (in the low current range), easy to select the optimal diode (due to its finely divided zener voltage ranks), guaranteed reliability equivalent to that of conventional products (Mini type package), allowing to reduce the mounting area, thickness and weight substantially compared with those of conventional products, allowing both reflow and flow mode of automatic soldering, allowing automatic mounting by an existing chip mounter.

M93S66, M93S56, M93S46 4Kbit, 2Kbit and 1Kbit (16-bit wide) MICROWIRE Serial Access EEPROM with Block Protection features industry standard MICROWIRE Bus, single supply voltage, single organization, programming instructions, self-timed programming cycle with auto-erase, user defined write protected area, page write mode, ready/busy signal during programming, speed, sequential read operation, enhanced ESD/Latch-Up Behavior, more than 1 million erase/write cycles, more than 40 year data retention.

This datasheet provides detailed information of M67760HC RF power module, including package dimension, pin definition, electrical characteristics, absolute maximum ratings etc.

This document is a preliminary notice about Mitsubishi's electric sound processor M62430FP. The processor features electronic volume control, tone control, SRS surround sound, etc.

This document describes the features and characteristics of the MITSUBISHI LSIs 262144-BIT (32768-WORD BY 8-BIT) CMOS STATIC RAM. The product is a 262,144-bit CMOS static RAM, fabricated using high-performance 3 polysilicon CMOS technology. It offers high density and low power static RAM. It is ideal for memory systems that require a simple interface. The M5M5256DVP and M5M5256DRV models are packaged in a 28-pin thin small outline package, making it easy to design a printed circuit board.