Industrial

MBRA120T3 - MBRA1100T3 is a schottky diode produced by Formosa MS, which has plastic package and low leakage current.

The MB40C568 is a high-speed CMOS A/D converter from Fujitsu Semiconductor. It features an 8-bit resolution and a maximum conversion rate of 20MHz.

MAX9424-MAX9427 are high-speed, low-skew quad PECL to ECL translators designed for high-speed data and clock driver applications. These devices feature an ultra-low 0.24ps(RMS) random jitter and channel-to-channel skew is less than 90ps in asynchronous mode. The four channels can be operated synchronously with an external clock, or in asynchronous mode determined by the state of the SEL input. An enable input provides the ability to force all the outputs to a differential low state. The parts differ from one another by their input and output termination options. The input options are an open input or an internal differential 100Ω termination. The output options are an open-emitter output or a series 50Ω termination. See Ordering Information. MAX9424-MAX9427 operate from a positive voltage supply of +2.375V to +5.5V, and a negative supply voltage of -2.375V to -5.5V and operate across the extended temperature range of -40°C to +85°C. They are offered in 32-pin 5mm x 5mm TQFP and space-saving 5mm x 5mm QFN packages. Applications include data and clock driver and buffer, central office backplane clock distribution, DSLAM backplane, base station, and ATE. Features include 0.24ps RMS Added Random Jitter, 10ps Channel-to-Channel Skew in Synchronous Mode, Guaranteed 500mV Differential Output at 3GHz Clock Frequency, 420ps Propagation Delay in Asynchronous Mode, Functionally Compatible with SK4426 (MAX9424), SK4430 (MAX9425), SK4436 (MAX9426), SK4440 (MAX9427), and Integrated Circuits.

The MAX727/MAX728/MAX729 are monolithic, bipolar, pulse-width modulation (PWM), switch-mode, step-down DC-DC regulators. Each is rated at 2A. Very few external components are needed for standard operation because the power switch, oscillator, feedback, and control circuitry are all on-chip. Employing a classic buck topology, these regulators perform high-current step-down functions. These regulators have excellent dynamic and transient response characteristics, while featuring cycle-by-cycle current limiting to protect against overcurrent faults and short-circuit output faults. They also have a wide 8V to 40V input range. Each regulator is available in a 5-pin TO-220 package. These devices have a preset 100kHz oscillator frequency and a preset current limit of 2.6A. See the MAX724/ MAX726 data sheet for more applications information.

The MAX6375-MAX6380 are ultra-low-power circuits used for monitoring battery, power-supply, and regulated system voltages. They provide excellent circuit reliability and low cost by eliminating external components and adjustments when monitoring nominal system voltages from 2.5V to 5V. These circuits assert an output signal whenever the VCC supply voltage falls below a preset threshold.

The MAX4330-MAX4334 are low-power, high-precision, wide-bandwidth amplifiers with Rail-to-Rail inputs and outputs that support single-supply operation. These devices require only 245µA per amplifier and offer input voltage ranges from VEE-250mV to VCC+250mV and output swing to the power supply rails. They also feature excellent common-mode rejection ratios and low distortion.

The MAX3967 is a 270Mbps SFP LED driver that contains a high-performance current driver, programmable temperature coefficient, LED prebias voltage adjustment, and a disable function.

The MAX202E–MAX213E, MAX232E/MAX241E line drivers/receivers are designed for RS-232 and V.28 communications in harsh environments. Each transmitter output and receiver input is protected against ±15kV electrostatic discharge (ESD) shocks, without latchup. The various combinations of features are outlined in the Selector Guide. The drivers and receivers for all ten devices meet all EIA/TIA-232E and CCITT V.28 specifications at data rates up to 120kbps, when loaded in accordance with the EIA/TIA-232E specification. The MAX211E/MAX213E/MAX241E are available in 28- pin SO packages, as well as a 28-pin SSOP that uses 60% less board space. The MAX202E/MAX232E come in 16-pin TSSOP, narrow SO, wide SO, and DIP packages. The MAX203E comes in a 20-pin DIP/SO package, and needs no external charge-pump capacitors. The MAX205E comes in a 24-pin wide DIP package, and also eliminates external charge-pump capacitors. The MAX206E/MAX207E/MAX208E come in 24-pin SO, SSOP, and narrow DIP packages. The MAX232E/MAX241E operate with four 1µF capacitors, while the MAX202E/MAX206E/MAX207E/MAX208E/ MAX211E/MAX213E operate with four 0.1µF capacitors, further reducing cost and board space.

HZM6.8MFA is a silicon planar Zener diode that can absorb surge. It is packaged in a monolithic design with four devices. The MPAK-5 package is suitable for high density surface mounting and high speed assembly.

This is a product description document that introduces Hynix Semiconductor's series of 200pin unbuffered DDR2 SODIMMs based on 512Mb 1st ver. DDR2 SDRAM. The series features a high-performance 8-byte interface in an industry-standard form factor, suitable for easy interchange and addition. The document also provides detailed information on different capacities and materials.

This document is about Hynix HY5V26C(L/S)F 4 Banks x 2M x 16bits Synchronous DRAM, a CMOS Synchronous DRAM that is ideal for main memory applications that require large memory density and high bandwidth.

This product is a yellow high flux LED designed for high current operation and high flux output application. It features high flux output and high luminance, designed for high current operation, uniform color, low profile and low thermal resistance, packaged in tubes for use with automatic insertion equipment. It can be used for automotive tail lights, brake lights and turn signals, electronic signs and etc.

32K x 8 High Performance Radiation Hardened ROM is an industry standard functionality 32768 word x 8-bit read only memory. It is fabricated with Honeywell’s radiation hardened technology, and is designed for use in systems operating in radiation environments. The ROM operates over the full military temperature range and re- quires only a single 5 V ± 10% power supply. The ROM is available with either TTL or CMOS compatible I/O. Power consumption is typically less than 15 mW/MHz in operation, and less than 5 mW when de-selected. The ROM operation is fully asynchronous, with an associated typical access time of 14 ns. Honeywell’s enhanced SOI RICMOS™IV (Radiation Insen- sitive CMOS) technology is radiation hardened through the use of advanced and proprietary design, layout, and pro- cess hardening techniques. The RICMOS™ IV process is a 5-volt, SIMOX CMOS technology with a 150 Å gate oxide and a minimum drawn feature size of 0.75 µm (0.6 µm effective gate length—Leff). Additional features include tungsten via plugs, Honeywell’s proprietary SHARP pla- narization process, and a lightly doped drain (LDD) struc- ture for improved short channel reliability.