Industrial

IRPT2056A is a power module for 3 hp motor drives. It has 3 hp (2.2 kW) power output, industrial rated at 150% overload for 1 minute. The input voltage is 180-240V AC, frequency 50/60 Hz. It has 3-phase rectifier bridge, 3-phase short circuit rated, ultrafast IGBT inverter, HEXFRED ultrafast soft recovery freewheeling diodes, brake IGBT and diode, low inductance (current sense) shunts in positive and negative DC rail, NTC temperature sensor, pin-to-baseplate isolation 2500V rms, easy-to-mount two-screw package and case temperature range -25°C to 125°C operational.

The MSAU300 series from Minmax is a high isolation 1W SMD single and dual output DC/DC converter. The series features low cost, low profile, high efficiency, high isolation, wide temperature performance range, etc. It is suitable for various applications including data communication equipment, distributed power systems, telecommunication equipment, and industrial robot systems.

The MPX5100/MPXV5100 series piezoresistive transducer is a state-of-the-art monolithic silicon pressure sensor designed for a wide range of applications, particularly those employing a microcontroller or microprocessor with A/D inputs. This sensor combines advanced micromachining techniques, thin-film metallization, and bipolar processing to provide an accurate, high level analog output signal that is proportional to the applied pressure.

IRF7821 HEXFET is a power mosfet produced by irf company. Its features are low on-resistance, low gate charge, and fully characterized avalanche voltage and current.

IRF1405ZS-7PPbF/IRF1405ZL-7PPbF is an automotive MOSFET with extremely low on-resistance and high current. Its main features include advanced process technology, ultra low on-resistance, 175°C maximum junction temperature, fast switching speed and improved repetitive avalanche rating.

IP178C/IP178CH is a product that integrates a 9-port switch controller, SSRAM, and 8 10/100 Ethernet transceivers. Each of the transceivers complies with the IEEE802.3, IEEE802.3u, and IEEE802.3x specifications. The transceivers are designed in DSP approach in 0.18um technology; they have high noise immunity and robust performance. IP178C/IP178CH operates in store and forward mode. It supports flow control, auto MDI/MDI-X, CoS, port base VLAN, bandwidth control, DiffServ, and SMA.

INA126 and INA2126 are precision instrumentation amplifiers for accurate, low noise differential signal acquisition. Their two-op-amp design provides excellent performance with very low quiescent current (175µA/chan.). This, combined with wide operating voltage range of ±1.35V to ±18V, makes them ideal for portable instrumentation and data acquisition systems. Gain can be set from 5V/V to 10000V/V with a single external resistor. Laser trimmed input circuitry provides low offset voltage (250µV max), low offset voltage drift (3µV/°C max) and excellent common-mode rejection. Single version package options include 8-pin plastic DIP, SO-8 surface mount, and fine-pitch MSOP-8 surface mount.

This document describes the features and characteristics of products such as IDT54/74FCT821A/B/C, IDT54/74FCT823A/B/C, IDT54/74FCT824A/B/C, and IDT54/74FCT825A/B/C from IDT, including the pinout/function, speed, and output drive capabilities equivalent to AMD's Am29821-25 bipolar registers over the full temperature and voltage supply extremes. Additionally, this series of products features buffered common clock enable (EN) and asynchronous clear input (CLR), among others.

IDT72V3686/96/106 3.3 VOLT CMOS TRIPLE BUS SyncFIFOTM WITH BUS-MATCHING, is an integrated circuit product produced by IDT company. It has the following features: 1. Storage capacity: IDT72V3686 - 16,384 x 36 x 2 IDT72V3696 - 32,768 x 36 x 2 IDT72V36106 - 65,536 x 36 x 2 2. Clock frequency: up to 100MHz (6.5ns access time) 3. Independent FIFO buffers can be used between a bidirectional 36-bit port and two unidirectional 18-bit ports (Port C receives and Port B transmits) 4. Supports 18-bit (word) and 9-bit (byte) bus sizing, 18 bits (word) on Ports B and C 5. Select IDT Standard Timing (using EFA, EFB, FFA, and FFC flag functions) or First Word Fall Through Timing (using ORA, ORB, IRA, and IRC flag functions) 6. Programmable Almost-Empty and Almost-Full flags, each with five default offsets (8, 16, 64, 256, and 1024) 7. Serial or parallel programming of partial flags 8. Big- or Little-Endian format for word and byte bus sizes 9. Loopback mode on Port A 10. Retransmit Capability 11. Master Reset clears data and configures FIFO, Partial Reset clears data but retains configuration settings 12. Mailbox bypass register

The IDT72805LB, IDT72815LB, IDT72825LB, IDT72835LB, and IDT72845LB are dual-directional synchronous FIFO chips produced by Integrated Device Technology (IDT) company. They have the characteristics of large capacity, high speed, flexible design, and small size. They are suitable for network switching, two-level parallel data prioritization, bidirectional data transfer, bus-matching between 18-bit and 36-bit data paths, 36-bit/package width expansion, and 8192 words/package depth expansion.

This document introduces the features and characteristics of IDT71V35761/781 high-speed SRAM, including 128K x 36/256K x 18 memory configurations, high system speed, LBO input selection, self-timed write cycle, etc.

The IDT7188 is a 65,536-bit high-speed static RAM organized as 16K x 4. It is fabricated using IDT’s high-performance, high-reliability technology — CMOS. This state-of-the-art technology, combined with innovative circuit design techniques, provides a cost effective approach for memory intensive applications. Access times as fast as 25ns are available. The IDT7188 offers a reduced power standby mode, ISB1, which is activated when CS goes HIGH. This capability significantly decreases power while enhancing system reliability. The low-power version (L) version also offers a battery backup data retention capability where the circuit typically consumes only 30µW operating from a 2V battery. All inputs and outputs are TTL-compatible and operate from a single 5V supply. The IDT7188 is packaged in a 22-pin, 300 mil ceramic DIP providing excellent board-level integration and reliability.

The DSC-5621/3 is a dual-port synchronous dynamic random access memory (SRAM) device from IDT that supports 3.3V and 2.5V power supplies and is available in 128-pin Thin Quad Flatpack, 208-ball fine pitch Ball Grid Array and 256-ball Ball Grid Array packages. The device features a high-performance 6T SRAM structure and has 10/12/15ns (max.) high-speed access speeds, allowing for simultaneous access to the same memory location. DSC-5621/3 supports JTAG and operates in the industrial temperature range (–40°C to +85°C).