Industrial

The MAX1843 is a 2.7A, 1MHz, low-voltage, step-down regulator with internal synchronous rectification in QFN package

max1626/max1627 is a step-down dc-dc switching controller produced by texas instruments. it has the characteristics of high efficiency, low dropout voltage, 100% maximum duty cycle and so on. this product is suitable for applications such as notebook computers, personal digital assistants and portable terminals.

The MAX1480A/MAX1480B/MAX1480C/MAX1490A/MAX1490B are complete, electrically isolated, RS-485/RS-422 data-communications interface solutions in a hybrid microcircuit.

The MAX1265/MAX1267 are low-power, 12-bit analog-to-digital converters (ADCs) featuring a successive-approximation ADC, automatic power-down, fast wake-up (2µs), an on-chip clock, +2.5V internal reference, and a high-speed 12-bit parallel interface. They operate with a single +2.7V to +3.6V analog supply. Power consumption is only 5.4mW at the maximum sampling rate of 265ksps. Two software-selectable power-down modes enable the MAX1265/MAX1267 to be shut down between conversions; accessing the parallel interface returns them to normal operation. Powering down between conversions can reduce supply current below 10µA at lower sampling rates. Both devices offer software-configurable analog inputs for unipolar/bipolar and single-ended/pseudo-differential operation. In single-ended mode, the MAX1265 has six input channels and the MAX1267 has two (three input channels and one input channel, respectively, when in pseudo-differential mode). Excellent dynamic performance and low power, combined with ease of use and small package size, make these converters ideal for battery-powered and data-acquisition applications or for other circuits with demanding power-consumption and space requirements.

MAX1146-MAX1149 are low-power, 14-bit, multi-channel analog-to-digital converters (ADCs) with built-in sample/hold, voltage reference, and clock.

Power-One's MAP80 series of power supplies provides reliable, tightly regulated DC power for commercial and industrial systems which require high peak current capabilities. Wide-range AC input and full international safety, EMI, and ESD compliance ensure world-wide acceptance. All units bear the CE Mark. The MAP80 utilizes a variable frequency design with a thermally efficient U-channel chassis to provide full power operation in convection cooled applications. Design innovations include metric and SAE mounting inserts on each mounting surface to provide integration flexibility. Dual-mode connectors provide traditional terminal block connections or popular single row Molex connector mating. Single output models feature wide-range output adjustability to meet a wide variety of standard and user specific output voltage requirements.

SKH00032BED MA2YD17 is a silicon based Schottky diode with high frequency rectification characteristics. Its reverse voltage VR = 100 V is guaranteed.

This document describes the M95640 and M95320 serial SPI bus EEPROMs with high-speed clock and various features. They are compatible with the SPI bus serial interface, support a single supply voltage, and have adjustable size read-only EEPROM area, byte and page write functions, and self-timed programming cycle. Additionally, they feature enhanced ESD protection, more than 100,000 or 1,000,000 erase/write cycles (depending on ordering options), and more than 40-year data retention.

This document introduces the M88 family of products from ST, which is an in-system programmable multiple-memory and logic FLASH+PSD system. It features a single supply voltage, 1 or 2 Mbit primary flash memory, a second non-volatile memory of 256 Kbit EEPROM or flash memory, and SRAM of either 16 Kbit or 64 Kbit. It also includes over 3000 gates of programmable logic, 27 reconfigurable I/O ports, an enhanced JTAG serial port, programmable power management, and high endurance with multiple erase/write cycles for the different types of memory.

M54HC4351/52/53 is a high-speed bipolar CMOS logic gate circuit produced by National Semiconductor. It consists of 8 three-terminal bidirectional switches. Its characteristic is that 5V logic signal can be used to control ±5V analog signal, fast switching speed, low switch resistance, high output voltage ratio, wide input voltage range, strong anti-interference ability and low power consumption

M50FW040 4 Mbit (512Kb x8, Uniform Block) 3V Supply Firmware Hub Flash Memory is a product of Toshiba Corporation. Its features are power supply voltage VCC = 3V to 3.6V, support program, erase and read operations, support 12V fast erase, two interfaces, Firmware Hub (FWH) Interface and Address/Address Multiplexed (A/A Mux), support read and write operations, support hardware write protection and register-based read and write protection, and have 5 additional general inputs for more flexibility in platform design and synchronization with 33MHz PCI clock. The programming time is 10µs. It has 8 uniform 64 Kbyte memory blocks, supports embedded byte programming and block erase algorithms, and has status register bits.

The M494 is a monolithic LSI integrated circuit fabricated in SGS-THOMSON's EPM2 process; an N-channel, Planox, double poly MOS process capable of including a floating gate NV memory cell (EEPROM). The i.c. has been designed as a complete digital TV tuning system based on the voltage synthesis principle and as a replacement for all the conventional tuners.

The M48Z58/58Y ZEROPOWER® RAM is an 8K x 8 non-volatile static RAM that integrates power-fail deselect circuitry and battery control logic on a single die. The monolithic chip is available in two special packages to provide a highly integrated battery backed-up memory solution.

M470L1624FT0-C(L)B3/A2/B0 is a 128MB DDR SDRAM SODIMM memory module from Samsung. It uses 256Mb F-die chips, supports 64-bit and 72-bit data width, and has a frequency of 133MHz and 166MHz with timing of 2.5-3-3 and 2.5-3-3.