This page provides manuals, user guides, handbooks, specifications, and maintenance instructions for Industrial. View online or download for free. Showing page 2812.
SNC698 is a 85 seconds single chip 4-channel voice synthesizer IC which contains 24 I/O pins and a tiny controller. By programming through the tiny controller, users’ applications including section combination, trigger modes, output status, high performance melody, multiple voices, and other logic functions can be implemented.
These devices are high speed hex buffers with 3-state outputs. They are organized as single 6-bit or 2-bit/4-bit, with inverting or non-inverting data (D) paths. The outputs are designed to drive 15 TTL Unit Loads or 60 Low Power Schottky loads when the Enable (E) is LOW. When the Output Enable (E) is HIGH, the outputs are forced to a high impedance “off” state. If the outputs of the 3-state devices are tied together, all but one device must be in the high impedance state to avoid high currents that would exceed the maximum ratings. Designers should ensure that Output Enable signals to 3-state devices whose outputs are tied together are designed so there is no overlap.
This document describes a single buffer/driver that is optimized for 1.8V operation and supports mixed-mode signal operation. It features low power consumption, fast transfer speed, and high noise immunity.
SN54ALS09 and SN74ALS09 are quadruple 2-input positive-AND gates with open-collector outputs. They can be used to perform the Boolean functions Y = A • B or Y = A + B in positive logic. The open-collector outputs require pullup resistors to perform correctly. These outputs may be connected to other open-collector outputs to implement active-low wired-OR or active-high wired-AND functions. Open-collector devices are often used to generate higher VOH levels. The SN54ALS09 is characterized for operation over the full military temperature range of –55°C to 125°C. The SN74ALS09 is characterized for operation from 0°C to 70°C.
This document describes high-speed hex buffers with 3-state outputs. They can be organized as a single 6-bit or 2-bit/4-bit, with inverting or non-inverting data paths. The outputs can drive 15 TTL Unit Loads or 60 Low Power Schottky loads when the Enable is LOW. When the Output Enable is HIGH, the outputs are forced to a high impedance 'off' state. If the outputs of the 3-state devices are tied together, all but one device must be in the high impedance state to avoid high currents that would exceed the maximum ratings. Designers should ensure that Output Enable signals to 3-state devices whose outputs are tied together are designed so there is no overlap.
SMDCHGR1008-47NG is a surface mount device with a ceramic construction that delivers the highest possible SRFs and Q values. The non-magnetic coilform also assures the utmost in thermal stability, predictability, and batch consistency. Its ferrite core inductors have lower DCR and higher current ratings. The inductance values range from 1.2 to 10uH.
The SM5002L series is a crystal oscillator module IC manufactured by NIPPON PRECISION CIRCUITS INC. It features low-voltage and low-current consumption oscillator circuits and output buffers. It incorporates built-in oscillation capacitance with superior frequency response to achieve stable 3rd overtone oscillation without any external components.
This document describes the features of the Security & Chip Card ICs Eurochip 77 SLE 7736 and SLE 7736E, including high security authentication and card-trash mechanism.
This document provides the resistance temperature curve, electrical specifications, and mechanical specifications of the SL03 50101 model from Ametherm, Inc.
