Industrial

The document is about the datasheet of P6KE10A Schottky Diode.

The MAX5722 is a 12-bit, low-power dual-channel D/A converter from Texas Instruments (TI) that is packaged in an 8-pin µMAX package and operates from a supply voltage range of +2.7V to +5.5V, with a supply current of 112µA. It is suitable for low-power and low-voltage applications.

The document introduces several products, including the Multiple Affinity Removal System LC Columns for automated sample processing, the Macroporous RP C18 High-Recovery Protein Columns for fractionation and desalting of complex protein mixtures, the Complex Proteomics Standard for proteomic workflow validation, the Proteomics Grade Trypsin with protocols for in-solution or in-gel digestion, the MS-friendly detergent PPS Silent Surfactant for greater recovery of hydrophobic proteins from complex mixtures, and the FFPE Protein Extraction Solution for detergent-free protein extraction from tissue blocks.

This note provides detailed instructions for installing and using the new Wellplate Autosampler Purge Kit for Agilent 1100 Series Wellplate Autosampler (G1367A and G1368A (thermostatted)).

400 Watt Transient Voltage Suppressors

provides an introduction to Agilent ChemStation for UV-visible Spectroscopy software

Agilent ChemStation UV-visible Spectroscopy Operator’s Manual for Biochemical Analysis Software is a manual for biochemical analysis software

The MAX509/MAX510 are quad, serial-input, 8-bit voltage-output digital-to-analog converters (DACs). They operate with a single +5V supply or dual ±5V supplies. Internal, precision buffers swing rail-to-rail. The reference input range includes both supply rails. The MAX509 has four separate reference inputs, allowing each DAC's full-scale range to be set independently. 20-pin DIP, SSOP, and SO packages are available. The MAX510 is identical to the MAX509 except it has two reference inputs, each shared by two DACs. The MAX510 is housed in space-saving 16-pin DIP and SO packages. The serial interface is double-buffered: A 12-bit input shift register is followed by four 8-bit buffer registers and four 8-bit DAC registers. A 12-bit serial word is used to load data into each register. Both input and DAC registers can be updated independently or simultaneously with single software commands. Two additional asynchronous control pins provide simultaneous updating (LDAC) or clearing (CLR) of input and DAC registers. The interface is compatible with MicrowireTM and SPI/ QSPITM. All digital inputs and outputs are TTL/CMOS compatible. A buffered data output provides for read-back or daisy-chaining of serial devices.

This is a manual from Agilent Technologies, Inc., which introduces the company's UV-visible Spectroscopy software

This document describes the features and characteristics of the GS82032AT/Q-180/166/133/100 64K x 32 2M Synchronous Burst SRAM produced by Giga Semiconductor, Inc.

The temperature control accessory provides temperature control for Agilent 8453 UV visible spectrophotometer to prevent temperature from affecting the measurement result. The temperature control accessory can provide a constant and stable temperature environment to ensure the reliability of the measurement results.

MAX4737/MAX4738/MAX4739 is a low voltage, low on-resistance (RON) quad single-pole/single throw (SPST) analog switch operating from a single +1.8V to +5.5V supply. These devices are designed for USB 1.1 and audio switching applications. The MAX4737/MAX4738/MAX4739 feature 4.5Ω RON (max) with 1.2Ω flatness and 0.4Ω matching between channels. These new switches feature guaranteed operation from +1.8V to +5.5V and are fully specified at 3V and 5V. These switches offer break-before-make switching (1ns) with tON <80ns and tOFF <40ns at +2.7V. The digital logic inputs are +1.8V logic compatible with a +2.7V to +3.6V supply. These switches are packaged in a chip-scale package (UCSP™), significantly reducing the required PC board area. The chip occupies only a 2mm ✕ 2mm area and has a 4 ✕ 4 bump array with a bump pitch of 0.5mm. These switches are also available in a 14-pin TSSOP package.

This document describes how to install the wide-bore heat exchanger using the parts supplied in this kit. You can install the wide-bore heat exchanger in the flow path, between the column and flow cell, in either the Filter-Photometric Detector (FPD) or Diode Array Detector (DAD) in your 1090 High Performance Liquid Chromatograph.

The MAX4356 is a 16 ✕ 16 highly integrated video crosspoint switch matrix with input and output buffers and On-Screen Display (OSD) Insertion. This device operates from dual ±3V to ±5V supplies or from a sin- gle +5V supply. Digital logic is supplied from an inde- pendent single +2.7V to +5.5V supply. Individual outputs can be switched between an input video signal source and OSD information through an internal, dedi- cated fast 2:1 mux (40ns switching times) located before the output buffer. All inputs and outputs are buffered, with all outputs able to drive standard 75Ω reverse-terminated video loads. The switch matrix configuration and output buffer gain are programmed via an SPI/QSPI™-compatible, three- wire serial interface and initialized with a single update signal. The unique serial interface operates in two modes facilitating both fast updates and initialization. On power-up, all outputs are initialized in the disabled state to avoid output conflicts in large-array configura- tions. Superior flexibility, high integration, and space-saving packaging make this nonblocking switch matrix ideal for routing video signals in security and video-on- demand systems. The MAX4356 is available in a 128-pin TQFP package and specified over an extended -40°C to 85°C temper- ature range.