Industrial

This document describes the features and characteristics of the 74HC/HCT4052 dual 4-channel analog multiplexer/demultiplexer, including wide analog input voltage range, low ON resistance, logic level translation, etc.

This data sheet introduces the features and characteristics of the 74HC/HCT4053 triple 2-channel analog multiplexer/demultiplexer

The 74hc/hct4059 is a programmable divide-by-n counter that can be programmed to divide an input frequency by any number (n) from 3 to 15999. There are four operating modes: timer, divide-by-n, divide-by-10000 and master preset, which are defined by the mode select inputs (Ka to Kc) and the latch enable input (LE) as shown in the Function table. The complete counter consists of a clock generator, a programmable counter and a latch. The clock generator is constructed using D flip-flops, whose output frequency is 1/2 of the clock frequency. The programmable counter is made up of four 14-bit Johnson counters, whose outputs are latched in the latch to form the master counter's output.

74HC/HCT4060 is a 14-stage binary ripple counter with oscillator

CC2530F32, CC2530F64, CC2530F128, and CC2530F256 are true system-on-chip solutions for 2.4GHz IEEE 802.15.4 and ZigBee applications. They feature IEEE 802.15.4 MAC timer, general-purpose timers, IR generation circuitry, 2.4GHz IEEE 802.15.4 compliant RF transceiver, etc. They also support CSMA/CA hardware, accurate digital RSSI/LQI support, programmable output power, battery monitor, temperature sensor, etc. The products are suitable for systems targeting compliance with ETSI EN 300 328 and EN 300 440 (Europe), FCC CFR47 Part 15 (US), and ARIB STD-T-66 (Japan) global radio-frequency regulations.

The 74HC/HCT4066 are high-speed Si-gate CMOS devices and are pin compatible with the “4066” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A.

The 74HC/HCT4067 is a 16-channel analog multiplexer/demultiplexer with low ON resistance and non-standard output capability.

The 74HC/HCT4075 is a high-speed Si-gate CMOS device with standard output capability and is categorized as SSI. It is pin compatible with the “4075” of the “4000B” series and is specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4075 provides the 3-input OR function.

The 74HC/HCT4094 is an 8-stage shift-and-store bus register with the following features: Output capability: standard, ICC category: MSI

The 74HC/HCT42 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A.

The 74HC/HCT423 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL)

74HC/HCT4316 are high-speed Si-gate CMOS devices. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4316 have four independent analog switches. Each switch has two input/output terminals (nY, nZ) and an active HIGH select input (nS). When the enable input (E) is HIGH, all four analog switches are turned off. Current through a switch will not cause additional VCC current provided the voltage at the terminals of the switch is maintained within the supply voltage range; VCC >> (VY, VZ) >> VEE. Inputs nY and nZ are electrically equivalent terminals. VCC and GND are the supply voltage pins for the digital control inputs (E and nS). The VCC to GND ranges are 2.0 V to 5.5 V.

This data sheet provides detailed information about the 74HC/HCT245 product, including features, functions, and specifications.

This document describes the features and characteristics of the 74HC/HCT251 8-input multiplexer, including true and complement outputs, 3-state outputs, multifunction capability, etc.

The 74HC/HCT253 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT253 have two identical 4-input multiplexers with 3-state outputs which select two bits from four sources selected by common data select inputs (S0, S1). When the individual output enable (1OE, 2OE) inputs of the 4-input multiplexers are HIGH, the outputs are forced to the high impedance OFF-state.