Industrial

ADN2865 is a clock and data recovery IC that supports 12.3Mb/s to 2.7Gb/s continuous rate and has a built-in loop-timed SERDES.

ADN2819 is a clock and data recovery IC with integrated limiting amp produced by Analog Devices

The ADN2816 is a clock and data recovery IC from Analog Devices that provides 10 Mb/s to 675 Mb/s of continuous data rates. The IC has a patented clock recovery architecture, does not require a reference clock, and has a loss-of-lock indicator. The ADN2816 also has an I2C interface to access optional features.

The ADN2815 is a Clock and Data Recovery IC that supports continuous data rates from 10 Mb/s to 1.25 Gb/s. It exceeds SONET requirements for jitter transfer/generation/tolerance and does not require an external reference clock.

The ADN2814 is a continuous rate 10 Mb/s to 675 Mb/s clock and data recovery IC with integrated limiting amp

The ADN2805 is a 1.25Gbps clock and data recovery IC that provides quantization and clock and data recovery functions. It automatically locks to all data rates without the need for an external reference clock or programming.

The product is a 622 Mbps clock and data recovery IC with integrated limiting amplifier.

The AD808 is a fiber optic receiver with quantizer and clock recovery and data retiming functions. The product meets the CCITT G.958 standard for STM-4 regeneration, and Bellcore TR-NWT-000253 standard for OC-12. Its output jitter is 2.5 degrees RMS, supports 622 Mbps clock recovery and data retiming, accepts NRZ data, no preamble required, and uses a phase-locked loop clock recovery, no crystal required. Its quantizer sensitivity is 4 mV, and its programmable level detection range is 10 mV to 40 mV. It can operate on a single power supply with a voltage range of +5 V or -5.2 V. Its power consumption is 400 mW, and its output is compatible with 10 KH ECL/PECL. It is packaged in a 16-lead narrow 150 mil SOIC.

The AD807 is a fiber optic receiver from Analog Devices that features a quantizer and clock recovery and data retiming. It meets CCITT G.958 and Bellcore TR-NWT-000253 standards, has a 155Mbps clock recovery and data retiming function, can accept NRZ data, does not require a preamble, and uses a phase-locked loop clock recovery that does not require a crystal.

MVC2000PDAM-GE25/M-GE25 is an industrial high-definition gun camera that uses a 1/1.8” inch CCD image sensor with an effective pixel of 1620×1236 to achieve 25fps high-definition images. The module supports GigE Vision protocol and provides 8-bit or 10-bit grayscale data output. In addition, the module also has pre-selected, pulse-width controlled trigger modes to meet a variety of application scenarios.

The document describes a 1.2 GHz Clock Distribution IC with PLL Core, Dividers, Delay Adjust, and Eight Outputs.

AD9512 is a 1.2 GHz clock distribution IC with 1.6 GHz inputs, dividers, delay adjustment and five outputs.

This product is an 800MHz clock distribution IC with dividers, delay adjust, and three outputs.

AD9514 is a 1.6GHz clock distribution IC with dividers, delay adjust and three outputs. Its features include 1.6GHz differential clock input, 3 programmable dividers, divide-by in range from 1 to 32, phase select for coarse delay adjust, 2 independent 1.6GHz LVPECL clock outputs, 225 fs rms of additive broadband output jitter, 1 independent 800MHz/250MHz LVDS/CMOS clock output, 300 fs rms/290 fs rms of additive broadband output jitter, time delays up to 10ns, 4-level logic pin configuration, space-saving, 32-lead LFCSP package.

AD9515 is a clock distribution IC from Analog Devices. It has 2 programmable dividers, 1.6GHz LVPECL output and 800MHz/250MHz LVDS/CMOS output, which can achieve low jitter and low phase noise clock distribution.