Industrial

This document introduces the features of the ADATE304 product, including the driver, comparator, PMU, voltage range, pulse width, current range, DAC, HVOUT output buffer, package, power consumption, etc.

The ADATE302-02 is a 500MHz dual integrated DCL with differential drive/receive, level setting DACs, and per pin PMU. The device includes a 3-level driver with high-Z mode and built-in clamps, precision trimmed output resistance, low leakage mode (typically <10nA). The device also includes a window and differential comparator, input equivalent bandwidth greater than 1GHz, load ±12mA maximum current capability. Per pin PMU force voltage range is -2.0V to +6.0V, with 5 current ranges: 25mA, 2mA, 200μA, 20μA, and 2μA. 14-bit DAC for DCL levels typically <±5mV INL (calibrated); 16-bit DAC for PMU levels typically <±1.5mV INL (calibrated); HVOUT output buffer has 0V to 13.5V output range.

The ADATE209 is a dual pin driver designed for testing DDR2, DDR3, and DDR4. It can also be used for high speed SoC applica- tions, such as testing PCI Express 1.0 and HDMI™. The device is a three-level driver capable of high fidelity swings from 200 mV to 4 V over a −1 V to +3.5 V range. It has high bandwidth, low power consumption, low EMI, and high resistance to interference.

ADATE206 is a 500MHz dual DCL device for ATE applications with driver, comparator and active load (DCL) functions.

This document describes the features and characteristics of the 250 MHz Dual DCL ADATE205 Rev. A product, including driver, comparator, and active load functions, 250 MHz toggle rate, dynamic clamps, operating voltage range of -1.5 V to +6.5 V, output voltage swing of 200 mV to 8 V, four range adjustable slew rate, true/complement data mode bit, 100-lead thin quad flat package, etc.

The AD53040 is a complete high speed pin driver designed for use in digital or mixed-signal test systems. Combining a high speed monolithic process with a unique surface mount package, this product attains superb electrical performance while preserving optimum packaging densities and long-term reliability.

The ADF4107 frequency synthesizer is a local oscillator that can be used in wireless receivers and transmitters. It features a 7.0 GHz bandwidth, a power supply range of 2.7 V to 3.3 V, a separate charge pump supply (VP) for extended tuning voltage in 3 V systems, a programmable dual-modulus prescaler with options of 8/9, 16/17, 32/33, and 64/65, programmable charge pump currents, programmable antibacklash pulse width, a 3-wire serial interface, analog and digital lock detect, and hardware and software power-down modes.

The ADF4360-1 is a fully integrated integer-N synthesizer and voltage-controlled oscillator (VCO).

The ADF4212L is a low power dual frequency synthesizer that can be used to implement local oscillators (LO) in the up-conversion and down-conversion sections of wireless receivers and transmitters. It can provide the L1 and L2 two frequency outputs. The L1 frequency range is from 800MHz to 2.4GHz and the L2 frequency range is from 200MHz to 1GHz.

The ADF4106 frequency synthesizer is used to implement local oscillators in the up-conversion and down-conversion sections of wireless receivers and transmitters. It features a 6.0 GHz bandwidth, 2.7 V to 3.3 V power supply, extended tuning voltage in 3 V systems, programmable dual-modulus prescaler, programmable charge pump currents, programmable antibacklash pulse width, 3-wire serial interface, analog and digital lock detect, and hardware and software power-down mode.

This document describes the ADF4001, which is a 200 MHz clock generator PLL. It features a wide bandwidth, programmable charge pump currents, and a 3-wire serial interface.

ADF4110/ADF4111/ADF4112/ADF4113 is a family of RF PLL frequency synthesizers from Analog Devices. The frequency range is 550MHz to 4.0GHz, and it supports 3V to 5.5V power supply. The device features a programmable dual-modulus prescaler, programmable charge pump currents, programmable antibacklash pulse width, 3-wire serial interface, analog and digital lock detect, etc. It is widely used in wireless base stations, wireless handsets, wireless LANs, communication test equipment and CATV equipment.

The ADF411x family of frequency synthesizers can be used to implement local oscillators (LO) in the upconversion and downconversion sections of wireless receivers and transmitters.

The AD809 is a 155.52 MHz frequency synthesizer that can be used to generate a 155.52 MHz bit clock for SONET/SDH/Fiber in the Loop systems. The device has a low cost, on-chip VCO that locks to either 8× or 16× the frequency at the 19.44 MHz or 9.72 MHz input. No external components are needed for frequency synthesis; however, the user can adjust the input frequency to achieve optimum performance.

AD835 is a 250MHz, voltage output 4-quadrant multiplier