Philips manuals, page 135
PHILIPS PDTC114ET handbook
This document describes the features and characteristics of the PDTC114ET NPN resistor-equipped transistor. The transistor has built-in bias resistors, which simplifies circuit design and reduces the number of components and board space. It is especially suitable for space reduction in interface and driver circuits, as well as inverter circuit configurations without the use of external resistors.
PHILIPS PCF8582C-2 256 × 8-bit CMOS EEPROM with I 2 C-bus interface handbook
This data sheet details the features and characteristics of the PCF8582C-2, including non-volatile storage, low power CMOS, single supply, and serial I2C-bus interface
PHILIPS PCA82C250 CAN controller interface handbook
The PCA82C250 is a high-performance CAN controller interface that supports the ISO 11898 standard and has a maximum transmission speed of 1Mbit/s. The product has transient protection, EMI interference protection, short-circuit protection, low power consumption and other features, and is widely used in automotive and other high-end fields.
PHILIPS PHP/PHB/PHD82NQ03LT TrenchMOS logic level FET Product data
PHP/PHB/PHD82NQ03LT TrenchMOS™ logic level FET is a logic level compatible, low gate charge, voltage range of 30V, current range of 75A power MOSFET.
PHILIPS TEA152x family STARplug handbook
TEA152x family is a high voltage EZ-HV SOI process, combined with low voltage BICMOS process, implemented switched mode power supply (SMPS) controller IC that operates directly from the rectified universal mains. The device includes a high voltage power switch and a circuit for start-up directly from the rectified mains voltage. A dedicated circuit for valley switching is built in (not implemented in TEA152xAJM versions), which provides a very efficient switching and allows flexible design by adjusting the frequency.
PHILIPS BFT92 PNP 5 GHz wideband transistor handbook
BFT92 is a PNP type 5GHz wideband transistor produced by Philips Semiconductors, which is suitable for RF wideband amplifiers, antenna amplifiers, radar systems, oscilloscopes, spectrum analyzers, etc. The transistor features low distortion and high power gain; due to its very high transition frequency, it also has excellent wideband properties and low noise up to high frequencies.
PHILIPS PCA82C251 CAN transceiver for 24 V systems datasheet
PCA82C251 is a CAN transceiver for 24V systems, which is fully compatible with the 'ISO 11898-24V' standard. It features slope control to reduce RFI, thermal protection, short-circuit proof to battery and ground, low-current standby mode, and high immunity against electromagnetic interference.
PHILIPS PHN110 N-channel enhancement mode MOS transistor Data Sheet
This data sheet describes the features of the PHN110 N-channel enhancement mode MOS transistor. The device features high-speed switching, no secondary breakdown, and very low on-resistance. It is mainly used in motor and actuator driver, power management, and synchronized rectification applications.
PHILIPS PMV31XN Data Sheet
The PMV31XN µTrenchMOS™ is an N-channel enhancement mode field-effect transistor using TrenchMOS™ technology. It features very fast switching, low threshold voltage, and a surface mount package.
PHILIPS 74AHC1G08; 74AHCT1G08 2-input AND gate Data Sheet
The 74AHC1G/AHCT1G08 is a high-speed Si-gate CMOS device that provides the 2-input AND function. It features symmetrical output impedance, high noise immunity, ESD protection, low power dissipation, balanced propagation delays, very small 5-pin package, and standard output capability.
PHILIPS LPC2104/2105/2106 Single-chip 32-bit microcontrollers handbook
The LPC2104/2105/2106 are single-chip 32-bit microcontrollers based on a 16/32 bit ARM7TDMI-S™ CPU with real-time emulation and embedded trace support, along with 128 kB of embedded high-speed flash memory. They feature a 128-bit wide memory interface and a unique accelerator architecture that enables 32-bit code execution at the maximum clock rate. For applications where critical code size is important, the alternative 16-bit Thumb™ Mode reduces code size by more than 30% with minimal performance impact. These microcontrollers are ideal for applications that require miniaturization, such as access control and point-of-sale, due to their small size and low power consumption. With a wide range of serial communications interfaces and on-chip SRAM options up to 64 kB, they are well-suited for communication gateways and protocol converters, soft modems, voice recognition, and low-end imaging, providing both large buffer size and high processing power. They also feature various 32-bit timers, PWM channels, and 32 GPIO lines, making them particularly suitable for industrial control and medical systems.
PHILIPS PCF8574 Remote 8-bit I/O expander handbook
The PCF8574 is a remote 8-bit I/O expander for the I2C bus. It features low standby current consumption, compatibility with most microcontrollers, latched outputs with high current drive capability, etc.
Philips Semiconductor BAT720 handbook
BAT720 is a Schottky diode produced by Philips Semiconductors. It features ultra high switching speed, low forward voltage, guard ring protected structure and small SOT23 plastic SMD package. It is suitable for ultra high speed switching, voltage clamping, protection circuits and other applications.
Philips Semiconductor PCF8583 handbook
This document is a product specification for the PCF8583 clock/calendar integrated circuit. The IC features a 240×8-bit RAM and supports counter function modes, alarm function modes, event counter mode, etc. The document also includes information on the I2C bus protocol and application information.
PHILIPS PHP/PHB/PHD71NQ03LT Manual
PHP/PHB/PHD71NQ03LT is a N-channel enhancement mode MOSFET product launched by Philips Semiconductors, using TrenchMOS™ technology, with logic level compatibility, low gate charge, large current, high power and other features, widely used in DC-DC converters, switch power supplies and other fields.