Philips Manuals - Page 133

ManualLib has 6,833 Philips manuals, in categories such as Cell Phones, Mobilephone Accessories, Digital cameras, Camcorders. Every file can be read online or downloaded as a PDF for free.

Philips manuals, page 133

  • PHILIPS PHK12NQ10T TrenchMOS standard level FET handbook

    PHK12NQ10T is an N-channel enhancement mode field-effect transistor using TrenchMOS™ technology. It has low on-state resistance and is suitable for applications such as DC-to-DC converters and portable equipment.

  • PHILIPS 8XC54/58 8XC51FA/FB/FC/80C51FA 8XC51RA+/RB+/RC+/RD+/80C51RA + handbook

    This datasheet introduces Philips Semiconductors' 8XC54/58 8XC51FA/FB/FC/80C51FA 8XC51RA+/RB+/RC+/RD+/80C51RA+ 80C51 8-bit microcontroller family 8K–64K/256–1K OTP/ROM/ROMless, low voltage (2.7V–5.5V), low power, high speed (33 MHz) features.

  • PHILIPS 74HC/HCT595 8-bit serial-in/serial or parallel-out shift register with output latches; 3-state Data Sheet

  • PHILIPS NXP BC857BS PNP general purpose double transistor

    This datasheet provides detailed information on the BC857BS PNP double transistor, including its features, applications, description, pinout, and maximum ratings.

  • PHILIPS BAS16W Manual

    The BAS16W is a high-speed switching diode with a very small plastic SMD package. It features high switching speed, maximum continuous reverse voltage of 75V, maximum repetitive peak reverse voltage of 85V, and maximum repetitive peak forward current of 500mA.

  • PHILIPS LFH0612/LFH0617/LFH0632/LFH0633 VOICE TRACER Manual

    Philips Voice Tracer digital recorder user manual introduces the product features, safety information, scope of supply, overview, getting started, recording, playback, deletion, personalization settings, firmware update, FAQs, and technical specifications.

  • PHILIPS PMV213SN TrenchMOS standard level FET Product data

    PMV213SN is an N-channel enhancement mode field-effect transistor using TrenchMOS™ technology. It has low on-state resistance in a small surface mount package. Suitable for DC-to-DC primary side switching.

  • PHILIPS BAW56 Manual

    BAW56 is a high-performance double diode produced by Philips Semiconductors. It has a small plastic SMD package, high switching speed, large power and is mainly used in thick and thin film circuits for high-speed switching.

  • PHILIPS BAP50-03 Manual

    This document is a product specification for the BAP50-03 general purpose PIN diode produced by Philips Semiconductors. The diode features low diode capacitance and low diode forward resistance, making it suitable for general RF applications.

  • PHILIPS PHK4NQ20T Manual

    The PHK4NQ20T is an N-channel enhancement mode field-effect transistor manufactured by Philips Semiconductors. It is packaged in a SOT96-1 (SO8) form, with low on-state resistance, surface mount, etc. It is suitable for DC-DC primary side switching and general purpose switch applications.

  • PHILIPS TJA1050 Manual

    The TJA1050 is a high speed differential CAN transceiver for connecting to automotive buses. It features low EMI, high EMI immunity and differential receiver.

  • PHILIPS 74ABT125 Quad buffer (3-State) INTEGRATED CIRCUITS handbook

    The 74ABT125 is a quad buffer produced by PHILIPS with a 3-state output interface, high output drive capability and low power consumption. This product is ideal for driving bus lines and can disable inputs in 3-state mode.

  • PHILIPS HEF4052B MSI handbook

    The HEF4052B is a dual 4-channel analogue multiplexer/demultiplexer with common channel select logic. Each multiplexer/demultiplexer has four independent inputs/outputs (Y0 to Y3) and a common input/output (Z). The common channel select logic includes two address inputs (A0 and A1) and an active LOW enable input (E). Both multiplexers/demultiplexers contain four bidirectional analogue switches, each with one side connected to an independent input/output (Y0 to Y3) and the other side connected to a common input/output (Z). With E LOW, one of the four switches is selected (low impedance ON-state) by A0 and A1. With E HIGH, all switches are in the high impedance OFF-state, independent of A0 and A1. VDD and VSS are the supply voltage connections for the digital control inputs (A0, A1 and E). The VDD to VSS range is 3 to 15 V. The analogue inputs/outputs (Y0 to Y3, and Z) can swing between VDD as a positive limit and VEE as a negative limit. VDD − VEE may not exceed 15 V.

  • PHILIPS PMWD15UN Manual

    PMWD15UN Dual N-channel µTrenchMOS™ ultra low level FET is a surface mount low power dual diode produced by Philips Semiconductors. This device has low voltage, low power, low threshold and fast switching characteristics. It is suitable for applications such as portable appliances, PCMCIA cards, battery management and load switching.

  • PHILIPS 80C51/87C51/80C31 Manual

    80C51/87C51/80C31 80C51 8-bit microcontroller family 4K/128 OTP/ROM/ROMless low voltage (2.7V–5.5V), low power, high speed (33 MHz) Product specification