Key facts
- Brand
- Honeywell
- Model
- VISTA-120
- Category
- Other
- Industry
- Industrial
- Documents
- 2
- Languages
- ZH
- Last added
- 2026-09-29
Start here
Honeywell VISTA-120 Security System Quick Programming Operation Manual
The manual provides step‑by‑step instructions for quickly programming the Honeywell VISTA‑120 security system. It covers keypad address setup, daily arming and disarming, zone programming, password configuration, and subsystem division.
Additional sections describe installation of the 4100SM serial module, setting A‑level user passwords, modifying the installer password, and a troubleshooting guide with common error messages. A table of optional accessories and their power consumption is also included. This manual is written in Chinese.
Honeywell VISTA-120 specifications
| Maximum subsystems | 8 |
|---|---|
| Maximum zones per system | 15 |
| Default keypad address | 00 |
| Serial module model | 4100SM |
Source: Honeywell VISTA-120 Security System Quick Programming Operation Manual
All Honeywell VISTA-120 documents by type
The shortest path to a working setup, usually only a few pages.
Questions answered in these manuals
How do I set the programming keypad address?
Power on the unit and hold keys 1 and 3 for 5 seconds; the keypad will show Addr=31 or Addr=00, then enter the desired address (e.g., 01) and press the * key.
From: Honeywell VISTA-120 Security System Quick Programming Operation Manual
How do I enter programming mode?
Enter the installer password 4140 followed by 8000; the keypad will display “Program Mode”.
From: Honeywell VISTA-120 Security System Quick Programming Operation Manual
How do I set the programming keypad address?
Press the 1 and 3 keys for 5 seconds; the keypad will show Addr=31 or Addr=00, then enter the desired address (e.g., 01).
How can I change the installer password?
Enter the installer password 4140, then 8000 to enter programming mode, input the new password, and confirm with ※99 to exit.