Key facts
- Brand
- Garmin
- Model
- GHC™ 50
- Category
- Vehicle GPS
- Documents
- 2
- Languages
- EN · ZH
- Last added
- 2026-11-13
Start here

Garmin GHC 50 Helm Control Installation Instructions
This document provides installation instructions for the Garmin GHC 50 helm control device. It includes important safety information, a list of required tools, and step-by-step procedures for mounting the device on a vessel's dashboard. The guide details two mounting methods: using included wood screws or nut plates with machine screws, depending on the mounting surface material.
Read onlineGarmin GHC™ 50 specifications
| Dimensions (without sun cover) | 105 x 140 x 51 mm (4.13 x 4.51 x 2.01 in.) |
|---|---|
| Weight (without sun cover) | 328 g (11.57 oz.) |
| Temperature range | From 5° to 131°F (from -15° to 55°C) |
| Compass-safe distance | 20 cm (7.87 in.) |
| Water rating | IEC 60529 IPX7 |
| Brightness | 1200 cd/m2 (NIT) |
| Typical current draw at 12 Vdc | 220 mA |
| NMEA 2000 input voltage | 9 to 16 Vdc |
Source: Garmin GHC 50 Helm Control Installation Instructions
All Garmin GHC™ 50 documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
Can I use my own screws to mount the device?
No, using screws other than the ones included will void your warranty.
How should I connect the NMEA 2000 power cable?
You must connect it to the boat ignition switch or through another in-line switch; do not connect it directly to the battery.
What tools are required for installing the GHC™ 50?
You need a drill and drill bits (9 mm, 2.5 mm, 3.5 mm, 4 mm), a 2-way screwdriver, a hacksaw or rotary tool, sandpaper, and marine sealant (recommended).
What is the operating temperature range for the GHC™ 50?
The device operates between -15°C and 55°C (5°F to 131°F).
