Key facts
Start here

Dell XPS 625 Service Manual
The Dell XPS 625 Service Manual provides detailed technical procedures for maintaining and repairing the system. It includes safety guidelines, recommended tools, and step-by-step instructions for replacing various internal components.
Key procedures covered include the replacement of the system board, processor, memory modules, PCI and PCI Express cards, fans, heat sinks, and power supply units. This manual is written in French.
Dell XPS 625 specifications
| Computer model | Dell XPS 625 |
|---|---|
| Processor type | AMD Athlon X2 Black; AMD Phenom X3 Black; AMD Phenom X4 Black; AMD Phenom II X4 Black |
| L1 cache | 2x64 KB |
| L2 cache | 512 KB |
| L3 cache | up to 2 MB (Phenom and Phenom II only) |
| Externally accessible drives | Two 5.25-inch bays for SATA DVD+/-RW Super Multi Drive, Blu-ray Disc combo, or Blu-ray Disc RW optical drive; one 3.5-inch bay for a FlexBay drive |
| Internally accessible drives | Four 3.5-inch bays for SATA hard drives |
| Memory connectors | Four internally accessible DDR2 DIMM sockets |
| Memory capacities | 1 GB and 2 GB |
| Memory type | 800-MHz DDR2 DIMM; non-ECC memory only |
| Minimum memory | 2 GB (2x1 GB DIMMs) |
| Maximum memory | 8 GB (4x2 GB DIMMs) |
| System chipset | AMD 790X |
| Data bus width | 64-bit |
| DRAM bus width | 128-bit across 2 DIMMs |
| Processor address bus width | 40-bit physical, 48-bit virtual |
| RAID support | RAID 0, RAID 1, RAID 5, and RAID 10 (internal SATA drives only) |
| BIOS chip | 16 Mb |
| PCI Express slots | Gen2 x1 at 500 MB/s, Gen2 x8 at 2 GB/s, and Gen2 x16 at 4 GB/s |
| PCI bus | 32-bit at 33 MHz |
| SATA | 1.5 Gbps and 3.0 Gbps |
| USB 2.0 | 480 Mbps high speed, 12 Mbps full speed, and 1.2 Mbps low speed |
| PCI Express x1 connector | One 36-pin connector with a maximum data width of 1 PCI Express lane |
Source: Dell XPS 625 Setup Guide
All Dell XPS 625 documents by type
Disassembly, diagnostics and part numbers, for repair.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
What tools are recommended for servicing the Dell XPS 625?
The recommended tools are a small Phillips screwdriver and a small flat-head screwdriver.
Who should perform repairs on the computer?
Repairs should only be performed by a certified maintenance technician to avoid voiding the warranty.
What tools may be needed for the procedures?
The procedures may require a small Phillips screwdriver and a small flat-blade screwdriver.
Where can technical specifications for the computer be found?
In the Setup Guide that shipped with the computer or on the Dell Support website.
How much clearance does the computer need for ventilation?
Leave at least 10.2 cm (4 inches) at the back and a minimum of 5.1 cm (2 inches) on all other sides.
From: Dell XPS 625 Setup Guide
Which display connectors can I use?
You can connect the display using VGA, HDMI, or DVI.
From: Dell XPS 625 Setup Guide
