The Dell XPS 625 is a desktop computer that features an Intel Core 2 Duo processor, 2GB of memory, a 250GB hard drive, a DVD burner, and a 17-inch LCD monitor.
This guide explains how to set up the Dell XPS 625, including display, keyboard, mouse, network, and power connections, plus Windows Vista setup. It also describes front and back panel features, software features, and basic troubleshooting steps.
Additional sections cover support tools, system recovery options, getting help, and technical specifications such as processor, memory, drives, RAID, and expansion bus details.
| Computer model | Dell XPS 625 |
|---|---|
| Processor type | AMD Athlon X2 Black; AMD Phenom X3 Black; AMD Phenom X4 Black; AMD Phenom II X4 Black |
| L1 cache | 2x64 KB |
| L2 cache | 512 KB |
| L3 cache | up to 2 MB (Phenom and Phenom II only) |
| Externally accessible drives | Two 5.25-inch bays for SATA DVD+/-RW Super Multi Drive, Blu-ray Disc combo, or Blu-ray Disc RW optical drive; one 3.5-inch bay for a FlexBay drive |
| Internally accessible drives | Four 3.5-inch bays for SATA hard drives |
| Memory connectors | Four internally accessible DDR2 DIMM sockets |
| Memory capacities | 1 GB and 2 GB |
| Memory type | 800-MHz DDR2 DIMM; non-ECC memory only |
| Minimum memory | 2 GB (2x1 GB DIMMs) |
| Maximum memory | 8 GB (4x2 GB DIMMs) |
| System chipset | AMD 790X |
| Data bus width | 64-bit |
| DRAM bus width | 128-bit across 2 DIMMs |
| Processor address bus width | 40-bit physical, 48-bit virtual |
| RAID support | RAID 0, RAID 1, RAID 5, and RAID 10 (internal SATA drives only) |
| BIOS chip | 16 Mb |
| PCI Express slots | Gen2 x1 at 500 MB/s, Gen2 x8 at 2 GB/s, and Gen2 x16 at 4 GB/s |
| PCI bus | 32-bit at 33 MHz |
| SATA | 1.5 Gbps and 3.0 Gbps |
| USB 2.0 | 480 Mbps high speed, 12 Mbps full speed, and 1.2 Mbps low speed |
| PCI Express x1 connector | One 36-pin connector with a maximum data width of 1 PCI Express lane |
Leave at least 10.2 cm (4 inches) at the back and a minimum of 5.1 cm (2 inches) on all other sides.
You can connect the display using VGA, HDMI, or DVI.
The maximum supported memory is 8 GB (4x2 GB DIMMs).
RAID 0, RAID 1, RAID 5, and RAID 10 are supported for internal SATA drives.