Instruction manual for the FrSky R9M Lite telemetry module covering specifications, binding, failsafe modes, and range check for the Taranis X-Lite.
The FrSky R9M Lite is a telemetry module designed for the FrSky Taranis X-Lite. It is described as a long-range, low-latency, high-precision RC system with telemetry data transmission and firmware upgradability on the Taranis X-Lite. The manual lists its dimensions, weight, 16 channels, 100mA operating current, Smart Port upgrade interface, 868MHz RF operating frequency, and compatibility with R9 series receivers.
The document explains the LED states, the binding procedure through the X-Lite External RF menu with Mode R9M—LBT, the three failsafe modes (No Pulse, Hold, and Custom), and a pre-flight range check using Range mode. It also notes that a receiver can only be bound to one RF module and that binding does not need to be repeated unless the receiver or transmitter module is replaced.
| Dimension | 62.4mm × 30mm×14.5mm (L×W×H) |
|---|---|
| Weight | 20g |
| Channel | 16CH |
| Operating Current | 100mA |
| Upgrade Interface | Smart Port |
| RF Operating Frequency | 868MHz |
| Compatibility | R9 series receivers |
| RF Power | 25mW (with telemetry) /100mW (without telemetry) |
The manual lists an RF operating frequency of 868MHz.
On the X-Lite, select External RF—Mode R9M—LBT and choose Bind, then connect the battery to the receiver while holding its F/S button. A flashing red LED on the receiver indicates binding is complete.
The manual states three failsafe modes: No Pulse, Hold, and Custom.
A pre-flight range check should be done before each flying session, using Range mode in the X-Lite menu.