The CP1W-EIP01-US is a low cost adapter that allows EtherNet/IP communications for the CP1H and CP1L PLCs with an available option board slot. The addition of an EtherNet/IP option board turns the PLC into an Intelligent Slave that easily connects to an EtherNet/IP Master for control & monitoring data sharing.
The CP1W-EIP01-US is a low‑cost EtherNet/IP slave adapter that enables CP1H and CP1L micro PLCs to communicate with an EtherNet/IP master. It mounts in an unused option board slot of the PLC and turns the controller into an intelligent slave that shares data via implicit messaging.
The manual lists key features, typical system configurations, and detailed specifications such as supported PLC models, transmission distance, communication method, IP addressing, and recommended packet interval. Additional literature and support resources are referenced at the end of the document.
| Part Number | CP1W-EIP01-US |
|---|---|
| Requested Packet Interval (RPI) | 10 ms (minimum recommended) |
The adapter works with CP1H and CP1L series PLCs that have an available option board slot.
Only one EtherNet/IP connection to a master is supported per adapter.
A minimum packet interval of 10 ms is recommended.