The DYTRA Model 3035C is a charge mode accelerometer whose output signal polarity is negative for acceleration toward the top. The document combines an outline/installation drawing with a specifications table for the sensor.
The drawing gives the .281 hex by .33 inch case, the 5-40 integral mounting stud and the radially mounted 5-44 coaxial connector. Mounting port preparation calls for a flat area of at least .250, flat to .001 TIR, with a #38 (.101) hole .150 deep minimum and a 5-40 UNC-2B thread .125 deep minimum. The specifications list a 2.5 gram weight, 300 series stainless steel housing, 2.5 pC/G nominal sensitivity, +500 G full-scale range and a -100 to +400 °F temperature range.
| Weight | 2.5 grams |
|---|---|
| Size, hex x height | .281 (9/32) x .33 inches |
| Mounting provision | 5-40 integral stud |
| Connector | 5-44 coaxial, radially mounted |
| Housing and connector material | 300 series stainless steel |
| Sensitivity, nominal | 2.5 pC/G |
| Range, full scale | +500 G's |
| Frequency range, +5% | 0.5 to 10 kHz |
| Resonant frequency, nominal | 45 kHz |
| Transverse sensitivity, max | 5% |
| Maximum vibration/shock | 600/3000 G's peak |
| Temperature range | -100 to +400 °F |
| Seal | Hermetic, glass-to-metal and TIG welded |
| Capacitance, nominal | 630 pF |
| Output signal polarity for acceleration toward top | Negative |
| Case grounding | Case grounded to electrical power ground |
The specified weight is 2.5 grams.
It has a 5-40 integral stud.
The output signal polarity is negative.
The listed temperature range is -100 to +400 °F.