The document introduces a respirator product that complies with the new European standard EN149: 2001. The product has passed the main performance tests, including filter penetration, total inward leakage, flammability, breathing resistance, and performance. It provides an Assigned Protection Factor of 20* (Nominal Protection Factor of 50), which can be used in atmospheres containing up to 20 times the Occupational Exposure Limit (OEL) of contaminant. However, the product does not protect the wearer against gases, vapours, solvents from paint spray operations, or atmospheres containing less than 19.5% oxygen. The wearer must be trained in the proper use of the product and should use it in adequately ventilated areas containing sufficient oxygen to support life. If breathing becomes difficult, dizziness or other distress occurs, the wearer should leave the area immediately. The respirator should be discarded and replaced if it becomes damaged or breathing resistance becomes excessive. The device should never be altered or modified. If the 8835 respirator is to be used for more than one shift, it should be cleaned at the end of each shift and stored between shifts in a sealed container or bag.
The 3M 8835 respirator offers exceptional comfort with a soft facepiece sealing ring, large filtration surface, exhalation valve, and adjustable straps and nose clip. It is supplied in two sizes (small/medium and medium/large) and is suitable for applications such as pharmaceuticals, chemical processing, battery manufacturing, construction, shipbuilding, welding, and iron and steel foundries.
The respirator meets European Community Directive 89/686, is CE‑marked, and complies with EN149:2001 (category FFP3D). Materials include polyisoprene/cotton straps, steel nose‑clip, polypropylene filter, polyurethane nose foam, PVC face seal, and a polypropylene valve. Weight is 35 g, and it provides an Assigned Protection Factor of 20. The sheet also includes fitting instructions, cleaning guidance, and safety warnings.
| Weight | 35 g |
|---|---|
| Assigned Protection Factor | 20 |
| EN149 Category | FFP3D |
The 3M 8835 is available in two sizes: small/medium and medium/large.
Clean the respirator with 3M face seal cleaner 105 by wiping the face seal gasket.
It meets the Basic Safety Requirements of the European Community Directive 89/686, has an EC‑type examination certificate No. 93 1026, is CE‑marked, and is produced at a BSI‑certified location.