Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.
Fatal hardware failure detected, possibly the console. The manual's first action is: “If possible, try a different console. If problem remains, record all information. Service may be required.”
All 3 error codes of the Digital Equipment Corporation KDJ11-A KDJ11-A CPU Module with their meaning, causes and what to do, taken from the manufacturer's manual with page references.
Incorrect measurement during calibration means the device detected an invalid or inconsistent reading while performing a calibration routine. The manual lists no action for this code.
Cold junction measurement error means the cold junction temperature sensor failed to provide accurate readings during measurement. The manual lists no action for this code.
Self zero error indicates a failure in the device's internal self-zeroing calibration process. The manual lists no action for this code.
One or more control parameters are outside scale limits, meaning set values exceed allowable operational ranges. The manual lists no action for this code.
Reference junction calibration error means the reference junction used for temperature measurement is not calibrated correctly. The manual lists no action for this code.
TC input calibration error indicates improper calibration of the thermocouple input sensor. The manual lists no action for this code.
RTD input calibration error means the device failed to properly calibrate its resistance temperature detector input. The manual lists no action for this code.
Incorrect configuration with the last two digits indicating which parameter is faulty (e.g., 209 refers to parameter P9). The manual lists no action for this code.
Incorrect access in a protected memory zone means unauthorized or improper attempt to modify secure memory areas. The manual lists no action for this code.
Memory write error indicates a failure to write data into the device's memory. The manual lists no action for this code.
All 10 error codes of the PID Microprocessor CTD43 / CTD46 / CTH46 PID microprocessor temperature controller with their meaning, causes and what to do, taken from the manufacturer's manual with page references.
Simulation error occurs when the system detects an issue during simulation or modeling. The manual lists no action for this code.
Hardware error signifies a malfunction in the physical components of the device. The manual lists no action for this code.