Industrial

The LMC6035/6 is a low power, low voltage op amp from National, with a guaranteed supply voltage range of 2.7V to 15.5V, ultra low input current, high gain and wide input common mode range.

The MCP1602 is a high efficient, fully integrated 500 mA synchronous buck regulator with a power-good monitor. It is ideally suited for applications powered from 1-cell Li-Ion or 2-cell/3-cell NiMH/NiCd batteries.

This document describes the features and characteristics of the C8051F2xx MCU family, including SAR ADC with 12-bit and 8-bit resolution, two comparators, VDD monitor and brown-out detector, On-Chip JTAG debug, high-speed 8051 mC core, memory, and digital peripherals.

LM195/LM395 Ultra Reliable Power Transistors

The MAX19516 is a 10-bit, dual-channel, 100Msps ADC from ADI that operates from a 2.5V to 3.3V AVDD supply and accepts a wide 0.4V to 1.4V input common-mode voltage range. It supports DC-coupled inputs and can be used in a variety of RF, IF, and baseband front-end applications. The device has a typical signal-to-noise ratio (SNR) performance of 60dBFS and a typical spurious-free dynamic range (SFDR) of 82dBc at fIN = 70MHz and fCLK = 100MHz.

This datasheet introduces the features and characteristics of MICRF405 RF transmitter IC, including frequency range, working mode, modulation mode, etc.

LM117/LM317A/LM317 3-Terminal Adjustable Regulator General Description

The PS9513, PS9513L1, PS9513L2, and PS9513L3 are optically coupled isolators containing a GaAlAs LED and a photo diode and a signal processing circuit. It is suitable for IPM drive and has high common mode transient immunity and low pulse width distortion.

TCET1100/TCET1100G is an optocoupler produced by Vishay Semiconductors, it has extra low coupling capacity, high common mode rejection, low temperature coefficient of CTR, reinforced isolation provides circuit protection against electrical shock (Safety Class II), lead-(Pb)-free component, component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC requirements, UL1577, CSA 22.2, BSI, DIN EN 60747-5-2 and FIMKO certification, applications for switch-mode power supplies, line receiver, computer peripheral interface, microprocessor system interface, etc.

The HFA3101 is an all NPN transistor array configured as a Multiplier Cell. Based on Intersil’s bonded wafer UHF-1 SOI process, this array achieves very high fT (10GHz) while maintaining excellent hFE and VBE matching characteristics that have been maximized through careful attention to circuit design and layout, making this product ideal for communication circuits. For use in mixer applications, the cell provides high gain and good cancellation of 2nd order distortion terms.

The LM1084 is a low dropout voltage regulator with a maximum dropout of 1.5V at 5A of load current. It has the same pin-out as National Semiconductor’s industry standard LM317. The LM1084 is available in an adjustable version, which can set the output voltage with only two external resistors. It is also available in three fixed voltages: 3.3V, 5.0V and 12.0V. The fixed versions intergrate the adjust resistors. The LM1084 circuit includes a zener trimmed bandgap ref- erence, current limiting and thermal shutdown. The LM1084 series is available in TO-220 and TO-263 pack- ages. Refer to the LM1085 for the 3A version, and the LM1086 for the 1.5A version.

This document is a data sheet for the SC28C94 quad universal asynchronous receiver/transmitter (QUART) produced by Philips Semiconductors.

the tlv2470 is a low-power, high-drive cmos switching power supply amplifier that offers 2.8mhz of gain-bandwidth product, operating over a supply voltage range of 2.7v-6v. it is available in 5- or 6-pin sot-23 and 8- or 10-pin msop packages.

The ADS7818 is a 12-bit sampling analog-to-digital converter (A/D) complete with sample/hold, internal 2.5V reference, and synchronous serial interface. It has low power, small size, and high-speed characteristics, making it ideal for battery operated systems such as wireless communication devices, portable multi-channel data loggers, and spectrum analyzers. It also provides low-cost isolation for remote data acquisition.