Industrial

TSAL4400 is a high efficiency infrared emitting diode in GaAlAs on GaAs technology, molded in clear, blue- grey tinted plastic packages. In comparison with the standard GaAs on GaAs tech- nology these emitters achieve about 100 % radiant power improvement at a similar wavelength. The forward voltages at low current and at high pulse current roughly correspond to the low values of the standard technology. Therefore these emitters are ideally suitable as high performance replacements of standard emitters.

TPS61020 is a 96% efficient synchronous boost converter from TI. It provides 200mA output current and can operate with an input voltage range of 0.9V to 6.5V.

The LT1767 is a 1.25MHz monolithic buck switching regulator with features such as high efficiency, wide operating voltage range, and low power consumption. It uses current mode control to provide fast transient response and excellent loop stability.

This document provides technical data for a metallized polypropylene film capacitor. The capacitor features a polypropylene film dielectric and a metal layer deposited by evaporation under vacuum. It has a non-inductive winding and tinned wire leads, as well as a plastic case and thermosetting resin filled for protection. The capacitor is solvent resistant and flame retardant according to UL94 V0. It operates within a temperature range of -40 to +110°C and has a rated voltage of 275Vac (50/60Hz) / 560 Vdc or 300Vac (50/60Hz) / 630 Vdc. The capacitance range is from 0.01µF to 10µF with different tolerance options. The capacitor also has self-healing properties and is used for interference suppression and other applications.

LA-ispPAC-POWR1014/A is a programmable power supply supervisor, reset generator and sequencing controller from the automotive family of Lattice Semiconductor Corp. Features include simultaneous monitoring of up to 10 power supplies, provision of up to 14 output control signals, programmable digital and analog circuitry, AEC-Q100 tested and qualified, embedded PLD for sequence control, embedded programmable timers, analog input monitoring, high-voltage FET drivers, and 2-wire (I2C/SMBus™ compatible) interface.

The LTC1703 is a dual switching regulator controller optimized for high efficiency with low input voltages. It includes two complete, on-chip, independent switching regulator controllers. Each is designed to drive a pair of external N-channel MOSFET devices in a voltage mode feedback, synchronous buck configuration. It uses a constant- frequency, true PWM design switching at 550kHz, minimiz- ing external component size and cost and optimizing load transient performance.

The LT ®3431 is a 500kHz monolithic buck switching regu- lator that accepts input voltages up to 60V. A high efficiency 3A, 0.1Ω switch is included on the die along with all the nec- essary oscillator, control and logic circuitry.

The LM40 is a hardware monitor that measures 3 temperature zones, 5 voltages and has a single-wire interface compatible with National Semiconductor’s SensorPath bus.

North fall protection products are designed with the user in mind. Our goal is to provide high quality easy-to-use fall protection so that your employees are encouraged to wear the products we make.

LM150/LM350A/LM350 3-Amp Adjustable Regulators

EL7515 is a high frequency, high efficiency step-up DC/DC regulator operated at fixed frequency PWM mode. With an integrated 1.4A MOSFET, it can deliver up to 600mA output current at up to 92% efficiency. The adjustable switching frequency is up to 1.2MHz, making it ideal for DSL applications. When shut down, it draws <1µA of current. This feature, along with the minimum starting voltage of 1.8V, makes it suitable for portable equipment powered by one Lithium Ion, 3 to 4 NiMH cells, or 2 cells of alkaline battery. The EL7515 is available in a 10 Ld MSOP package, with maximum height of 1.1mm. With proper external components, the whole converter takes less than 0.25in2 PCB space. This device is specified for operation over the full -40°C to +85°C temperature range.

BYV28/ is an ultra fast avalanche sintered glass diode produced by Vishay Semiconductors. It features controlled avalanche characteristic, low forward voltage, ultra fast recovery time, glass passivated junction, hermetically sealed package, lead (Pb)-free component, and it is in accordance with RoHS 2002/95/EC and WEEE 2002/96/EC. It is mainly used for very fast rectification applications.

This user guide introduces the features and use of the DS51510A voltage supervisor SOT23 evaluation board.

The LT1610 is a micropower fixed frequency DC/DC converter that operates from an input voltage as low as 1V. Intended for small, low power applications, it switches at 1.7MHz, allowing the use of tiny capacitors and inductors. The device can generate 3V at 30mA from a single cell (1V) supply. An internal compensation network can be connected to the LT1610’s VC pin, eliminating two external components. No-load quiescent current of the LT1610 is 30µA, and the internal NPN power switch handles a 300mA current with a voltage drop of 300mV. The LT1610 is available in 8-lead MSOP and SO packages.