Industrial

This document introduces the GL05T to GL24T series of low capacitance ESD protection diodes for high-speed data interfaces. The product features transient protection as per IEC 61000-4-2 (ESD) and IEC 61000-4-5 (Lightning), making it suitable for data lines, USB port protection, LAN equipment, etc. It is packaged in a small size for use in portable electronics and complies with RoHS and WEEE standards.

This document describes the connection and application data for the Able Systems Ap24XS and Ap24XS-40 panel mount printers. These products support the EPSON M190 and M192 mechanisms and can be configured for single or double width print modes. They also support the full 224 IBM character set and can be configured for single or double height characters.

The AD9824 is a complete analog signal processor for CCD applications. It features a 30 MHz single-channel architecture that can handle data rates up to 14 bits and 30 MSPS.

The UEI30 series isolated DC/DC converter family features a full 30 Watt output in 1.8 square inches of board area, offering efficient regulated DC power for printed circuit board mounting.

The BWR series mixed voltage 5V and 3.3V dual output DC/DC converters provide 33W of power and have an input voltage range of 10-18V, 18-36V or 36-75V. They are housed in a compact 2” x 2” x 0.45” package, have been certified to UL1950 and EN60950-1, and feature continuous short-circuit protection, full isolation, 1500Vdc guarantee, -40 to +100°C operating temperature, input undervoltage and overvoltage shutdown, output overvoltage protection and thermal shutdowns.

The AD9943/AD9944 are complete analog signal processors for CCD applications. They feature a 25 MHz single-channel architecture designed to sample and condition the outputs of interlaced and progressive scan area CCD arrays. The signal chain for the AD9943/AD9944 consists of a correlated double sampler (CDS), 6 dB to 40 dB 10-bit variable gain amplifier (VGA), low noise optical black clamp circuit, preblanking function, 10-bit (AD9943), 12-bit (AD9944) 25 MSPS A/D converter, 3-wire serial digital interface, 3 V single-supply operation, and space-saving 32-lead 5 mm × 5 mm LFCSP package.

The LTC®1484 is a low power RS485 compatible transceiver with a fail-safe feature that guarantees a high receiver output state when the inputs are left open, shorted together or terminated with no signal present. The LTC1484 can also drive low cost residential telephone wires.

The AD9949 is a highly integrated CCD signal processor for digital still camera applications. Specified at pixel rates of up to 36 MHz, the AD9949 consists of a complete analog front end with A/D conversion, combined with a programmable timing driver. The AD9949 also features a Precision Timing™ core and other characteristics, making it suitable for digital cameras and high-speed digital imaging applications.

This document describes the features and characteristics of the E2K-F flat proximity sensor. The sensor has a thickness of only 10mm, which saves installation space. It can detect both metallic and nonmetallic objects, and can be directly mounted onto a metallic surface.

M29W200BT/M29W200BB is 2Mbit low voltage single supply flash memory, single power supply range is 2.7-3.6V, read timing is 55ns, program time is 10µs/byte, supports 7 memory blocks, including 1 boot block (top or bottom location), 2 parameter blocks and 4 main blocks, supports embedded byte/word program algorithm, embedded multi-block/chip erase algorithm, status register polling and toggle bits, ready/busy output pin, supports erase suspend and resume mode, unlock bypass program command, temporary block unlock mode, low power consumption (standby and automatic standby), 100,000 program/erase cycles/block, 20 years data retention (defect rate is less than 1ppm/year), electronic signature (manufacturer code: 0020h, top device code M29W200BT: 0051h, bottom device code M29W200BB 0057h), supports TSOP48(N) and SO44(M) packages.

MAX6650/MAX6651 are fan controllers for 5VDC/12VDC brushless fans with built-in tachometers. They support SMBus™/I2C* interface, can monitor fan speed and automatically adjust voltage to match the pre-programmed speed.

The MAX1614 is a high-side, N-channel power MOSFET driver with low-battery detection for battery power-switching functions in portable equipment. It features 3µA of quiescent current and 6µA of off-current and can be used in notebook computers, portable equipment, and hand-held instruments.

The AD9945 is a complete analog signal processor for CCD applications. It features a 40 MHz single-channel architecture specifically designed to sample and condition the outputs of interlaced and progressive CCD sensors.

AD9823 is a correlated double sampler (CDS) supporting 40MHz sampling frequency, fixed gain of 3.5dB, internal voltage reference supply, supporting SHP and SHD sampling clocks.

87LPC764 is a low power, low price, low pin count (20 pin) microcontroller with 4 kB OTP from Philips Semiconductors.