Industrial

Aries EJECT-A-DIP® is a rugged, solderable socket with a unique ejector/latch for fast in-field board maintenance.

This document describes the features and characteristics of the Series 0503 Pin-Line Collet Sockets with Wire Wrap Pins produced by Aries. The product can be custom designed and produced according to specific requirements, including special materials, platings, sizes, and configurations. The product is stackable and can be mounted on any centers. It is available with wire wrap or solder tail pins. The specifications include body and pin material, plating, contact material, contact plating, contact current rating, and operating temperature.

This document introduces the features and specifications of the 10004 PGA test and burn-in sockets produced by ARES company. The seat is made of black UL 94V-0 polyphenylene sulfide (PPS), with gold, nickel-plated beryllium-copper alloy or nickel-boron-plated Spinodal alloy contacts, with a contact current rating of 1 amp and a working temperature range of -85°F to 257°F (-65°C to 125°C) (gold plating), -85°F to 392°F (-65°C to 200°C) (nickel-plated Spinodal).

The OPF560 series receiver is a low cost solution for high speed fiber optic communication designs. The output of the receiver is an analog, low impedance, emitter follower voltage source capable of driving an amplifier or level translating circuitry. This allows the subsequent circuitry to use the device in either the analog mode or translated to ECL/TTL levels for use in a digital mode at data rates up to 155MBaud. The receiver is comprised of a high speed, low noise, photodiode coupled to a transimpedance amplifier which produces an output voltage proportional to the input light amplitude. This hybrid approach solves many of the problems of high speed data link designs by placing a pre-amplifier close to the photodiode. The amplification of the transimpedance amplifier makes the output signal much less susceptible to EMI.

The LTC1625 is a synchronous step-down switching regulator controller that drives external N-Channel power MOSFETs using few external components. Current mode control with MOSFET VDS sensing eliminates the need for a sense resistor and improves efficiency. The frequency of a nominal 150kHz internal oscillator can be synchronized to an external clock over a 1.5:1 frequency range. Burst Mode operation at low load currents reduces switching losses and low dropout operation extends operating time in battery-powered systems. A forced continuous mode control pin can assist secondary winding regulation by disabling Burst Mode operation when the main output is lightly loaded. Fault protection is provided by foldback current limiting and an output overvoltage comparator. The LTC1625 is available in 16-Lead Narrow SSOP and SO Packages.

The HFA1130 is a high speed wideband current feedback amplifier featuring programmable output limits. Built with Intersil’s proprietary complementary bipolar UHF-1 process, it is the fastest monolithic amplifier available from any semiconductor manufacturer. This amplifier is the ideal choice for high frequency applications requiring output limiting, especially those needing ultra fast overdrive recovery times. The output limiting function allows the designer to set the maximum positive and negative output levels, thereby protecting later stages from damage or input saturation. The sub-nanosecond overdrive recovery time quickly returns the amplifier to linear operation, following an overdrive condition. The HFA1130 offers significant performance improvements over the CLC500/501/502.

This document is a Data Sheet for Aries Series 650 Header Covers. Aries Series 650 Header Covers is a black UL 94V-0 4/6 Nylon dust cover, suitable for Aries’ Series 600 Headers and Series 675 DIP Program Headers. The product has 4 heights, 0.125 inches, 0.375 inches, 0.500 inches and 0.750 inches, which can be used to mount components from 1/8 inches to 3/4 inches high.

The OPF322 series LED consists of a hermetic LED, pre-mounted and aligned in an ST* receptacle. This configuration is designed for PC board or panel mounting. Includes lock washer and jam nut, two 2-56 screws, and a dust cap. The LED’s are designed to interface with multimode optical fibers from 50/125 to 200/300 microns.

This document introduces the features and specifications of Aries' 650 series header covers.

The OPB960 and OPB970 series of Photologic Photo Integrated Circuit Switches provide optimum flexibility for the design engineer. Building from a standard housing with a .125” wide slot, the user can specify (1) type and polarity of TTL output, (2) discrete shell material, (3) aperture width, and (4) type of mounting configuration. Available with 24”, 26AWG wire leads as OPB980/OPB990 series.

This document is about Aries' Universal Test Socket product introduction, which features the ability to accept devices with a center distance of .300 to .600. All pin count sockets can be used on PCBs with either a .300 or .600 center distance.

Aries specializes in custom design and production. In addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. Aries reserves the right to change product specifications without notice.

Aries 600 series DIP headers with coined contacts