This page provides manuals, user guides, handbooks, specifications, and maintenance instructions for Industrial. View online or download for free. Showing page 3371.
This is a 2.3m long Y power lead with a 3-core round UK mains plug and 2 IEC sockets, rated at 250V AC, 13A, 18,000A maximum contact current, 1ns response time, model number HP1-1E2-S.
This document introduces the Amphenol JT/LJT series subminiature cylindrical connectors, including connector specifications, plug and socket arrangements, and plug and socket models.
This low energy lamp is made by Philips and has a power rating of 14 watts. It has a warm white appearance and can output a brightness of 2700K. The bulb measures 132mm in length and 40mm in diameter. It requires an AC voltage of between 220 and 240 volts. The average life span is 8000 hours.
The LM2832 is a monolithic, high frequency, PWM step-down DC/DC converter in a 6 Pin LLP and a 8 Pin eMSOP package. It provides all the active functions to provide local DC/DC conversion with fast transient response and accurate regulation in the smallest possible PCB area.
This document describes a product called Power Leads, which features an IEC hot connector, black stripped end, 50/6mm 2.00m HO5VV-F 3 x 1.00 black SH10187R specifications, suitable for power connections.
The LTC1872 is a constant frequency current mode step-up DC/DC controller providing excellent AC and DC load and line regulation. The device incorporates an accurate undervoltage lockout feature that shuts down the LTC1872 when the input voltage falls below 2.0V. The LTC1872 boasts a ±2.5% output voltage accuracy and consumes only 270µA of quiescent current. For applications where efficiency is a prime consideration, the LTC1872 is configured for Burst Mode operation, which enhances efficiency at low output current. In shutdown, the device draws a mere 8µA. The high 550kHz constant operating frequency allows the use of a small external inductor. The LTC1872 is available in a small footprint 6-lead SOT-23.
G6D-F4B/G3DZ-F4B Four-point output terminal relay, small and easy to use. Same size as PYF socket. 31 x 35 x 68 mm (W x H x D). Each terminal circuit (with coil or contact) is independent from one another. Short Bar ensures easy connection of common and adjacent terminals. Provided with a terminal cover that prevents electric-shock accidents. Available in relay and MOS FET relay models. LED operation indicator. Built-in diode absorbs coil surge. Mounts either on DIN track or screws. Tool for easy mounting or removal of Relays provided.
This document is the datasheet of PC3H7J00000F series photocoupler, which introduces the features of the product, including certifications, application scenarios, appearance size, package form, features, etc.
The OPB916 consists of an infrared emitting diode and a Photologic photo integrated circuit, and it features choice of output configuration and low power consumption.
The MAX1945R/MAX1945S high-efficiency pulse-width modulation (PWM) switching regulators deliver up to 6A of output current. The devices operate from an input supply range of 2.6V to 5.5V and provide selectable output voltages of 1.8V, 2.5V, and adjustable output voltages from 0.8V to 85% of the supply voltage. With VCC at 3.3V/5V, the input voltage can be as low as 2.25V. The MAX1945R/MAX1945S are ideal for on-board post-regulation applications. Total output voltage error is less than ±1% over load, line, and temperature. The MAX1945R/MAX1945S operate at a selectable fixed frequency (500kHz or 1MHz) or can be synchronized to an external clock (400kHz to 1.2MHz). The high operating frequency minimizes the size of external components. The high bandwidth of the internal error amplifier provides excellent transient response. The MAX1945R/MAX1945S have internal dual N-channel MOSFETs to lower heat dissipation at heavy loads. Two MAX1945R/MAX1945Ss can operate 180 degrees out-of-phase of each other to minimize input capacitance. The devices provide output voltage margining for board-level testing. The MAX1945R provides a ±4% voltage margining. The MAX1945S provides a ±9% voltage margining. The MAX1945R/MAX1945S are available in 28-pin TSSOP-EP packages and are specified over the -40°C to +85°C industrial temperature range. An evaluation kit is available to speed designs.
The TPS series low ESR capacitors have inherently low ESR (equivalent series resistance) and are capable of handling higher ripple current, producing lower ripple voltages, less power and heat dissipation than standard products for the most efficient use of circuit power. TPS series products have been designed, manufactured, and preconditioned for optimum performance in typical power supply applications. By combining the latest improvements in tantalum powder technology, improved manufacturing processes, and application specific pre-conditioning tests, AVX is able to provide a technologically superior alternative to the standard range.
PC3SF21YVZ Series is a phototriac coupler with a VDRM of 600V, reinforced insulation type, zero crossing type DIP 6 pin phototriac coupler for triggering.
The document provides information about the features of model 2301, such as the no load speed, drilling capacity in steel and wood, battery capacity, weight, etc. It also mentions the price of the product, battery type, and the included charger, battery, and double ended screw bit.
