Industrial

The MC10103 is a quad 2-input OR gate that provides one gate with OR/NOR outputs. It has low power consumption and fast response time.

The MC100EP016A is a high-speed synchronous, presettable, cascadeable 8-bit binary counter produced by Semiconductor Components Industries, LLC, with a working frequency of up to 1.3 GHz, 30% higher than MC100EP016

SMA package surface mount Schottky diode, ideal for low voltage, high frequency rectification, or as free wheeling and polarity diodes in surface mount applications where compact size and weight are critical to the system.

This is a data sheet for MBM29LV160TE/BE, a 0.23 µm process flash memory that is compatible with JEDEC standard commands, supports 3.0 V read, program and erase, and has a maximum access time of 70 ns.

This document describes the features and characteristics of Fujitsu Flash Miniature cards, including small size, low cost, simple interface, high performance, and low power consumption. The product is suitable for various markets such as digital photography, audio recording, hand held PCs, and other small portable equipment.

This datasheet describes the features and characteristics of Fujitsu Semiconductor's Stacked MCP (Multi-Chip Package) FLASH MEMORY & SRAM CMOS 16M ( × 8/ × 16) FLASH MEMORY & 4M ( × 8/ × 16) STATIC RAM.

The Fujitsu MB15F72UL is a serial input Phase Locked Loop (PLL) frequency synthesizer with a 1300 MHz and a 350 MHz prescalers. A 64/65 or a 128/129 for the 1300 MHz prescaler, and a 8/9 or a 16/17 for the 350 MHz prescaler can be selected for the prescaler that enables pulse swallow operation. The BiCMOS process is used, as a result a supply current is typically 2.5 mA at 2.7 V. The supply voltage range is from 2.4 V to 3.6 V. A refined charge pump supplies well-balanced output current with 1.5 mA and 6 mA selectable by serial data. The data format is the same as the previous one MB15F02SL, MB12F72SP. Fast locking is achieved for adopting the new circuit. The new package (BCC20) decreases a mount area of MB15F72UL more than 30% comparing with the former BCC16 (for dual PLL) . MB15F72UL is ideally suited for wireless mobile communications, such as CDMA.

The MAX987/MAX988/MAX991/MAX992/MAX995/MAX996 single/dual/quad micropower comparators feature low-voltage operation and Rail-to-Rail inputs and outputs. Their operating voltage ranges from +2.5V to +5.5V, making them ideal for both 3V and 5V systems. These comparators also operate with ±1.25V to ±2.75V dual supplies. They consume only 48µA per comparator while achieving a 120ns propagation delay. The common-mode input voltage range extends 250mV beyond the supply rails. Input bias current is typically 1.0pA, and input offset voltage is typically 0.5mV. Internal hysteresis ensures clean output switching, even with slow-moving input signals. The output stage’s unique design limits supply-current surges while switching, virtually eliminating the supply glitches typical of many other comparators. This design also minimizes overall power consumption under dynamic conditions. The MAX987/MAX991/MAX995 have a push/pull output stage that sinks as well as sources current. Large internal output drivers allow rail- to-rail output swing with loads up to 8mA. The MAX988/MAX992/MAX996 have an open-drain output stage that can be pulled beyond VCC to 6V (max) above VEE. These open-drain versions are ideal for level translators and bipolar to single-ended converters. The single MAX987/MAX988 are available in tiny 5-pin SOT23 packages.

MAX8667/MAX8668 1.5MHz Dual Step-Down DC-DC Converters with Dual LDOs and Individual Enables

This document describes the features of the 3AG OMNI-BLOK® molded base type fuse block, including low profile design, individual barriers, self-alignment function, one-piece clip/terminal, low contact resistance, etc. The product is UL recognized and CSA certified.

The 3315 - 9 mm Square Sealed Incremental Encoder features: miniature package for design flexibility; long operating life; conductive plastic element; bushing or PC board mount; quadrature output; RoHS compliant versions available.

This document is the specification for 314/324 series ceramic body fast-acting fuses.

This is a document about Schottky rectifiers, which describes the features and characteristics of the product. The rectifier has a very low forward voltage drop and moderate leakage current, and is suitable for applications such as switching power supplies, converters, free-wheeling diodes, and reverse battery protection. It can operate reliably up to a junction temperature of 150°C and has features such as high purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance, high frequency operation, enhanced ruggedness, and long term reliability.

This document describes the specifications of SANYO products and states that these products are not suitable for applications that require extremely high levels of reliability, such as life-support systems and aircraft control systems. It also provides details about the 2SK3120 model, an N-Channel Silicon MOSFET for ultrahigh-speed switching applications.