Industrial

This document describes the electrical performance, frequency range, package size, supply voltage, output type, temperature stability, aging, and other characteristics of Vectron International's Crystal Clock Oscillators (XO’s) products.

XE9624F supplier search

The XC62FP series is a group of positive voltage output, three-pin regulators, that provide a high current even when the input/output voltage differential is small. Low power consumption and high accuracy is achieved through CMOS and laser trimming technologies. The XC62FP consists of a high-precision voltage reference, an error amplification circuit, and a current limited output driver. Transient response to load variations have improved in comparison to the existing series. SOT-23 (150mW), SOT-89 (500mW) and TO-92 (300mW) packages are available. Maximum Output Current : 250mA (within max. power dissipation, VOUT = 5.0V) Output Voltage Range : 2.0V ~ 6.0V in 0.1V increments (1.5V ~ 1.9V for custom products) Highly Accurate: Output voltage ±2% (±1% for semi-custom products) Low Power Consumption : Typ. 2.0µA @ VOUT=5.0V Output Voltage Temperature Characteristics : Typ. ±100ppm/°C Input Stability : Typ. 0.2%/V Small Input-Output Differential : IOUT = 100mA @ VOUT = 5.0V with a 0.12V differential. Ultra Small Packages : SOT-23 (150mW) mini-mold, SOT-89 (500mW) mini-power mold TO-92 (300mW) GBattery Powered Equipment GPalmtops GPortable Cameras and Video Recorders GReference Voltage Sources NCMOS Low Power Consumption NSmall Input-Output Voltage Differential : 0.12V @ 100mA, 0.38V @ 200mA NMaximum Output Current : 250mA (VOUT=5.0V) NOutput Voltage Range : 2.0V~6.0V NHighly Accurate : ±2% (±1%)

The X98027 is a 275MHz triple video digitizer with digital PLL from Intersil. It supports RGB and YUV formats, and provides high PSRR and dynamic performance to meet the stringent requirements of the graphics display industry.

The N-Channel JFET Switch 2N4391-2N4393/PN4391-PN4393/SST4391-SST4393 is a N-Channel JFET Switch produced by Toshiba. Its features are rds(on)<300 Ohms (2N4391), ID(OFF)<100pA, and it can switch ±10VAC with ±15V supplies.

The X25C02 is a CMOS 2048-bit serial E2PROM, internally organized as 256 x 8. The X25C02 features a serial interface and software protocol allowing operation on a simple three-wire bus. The bus signals are a clock input (SCK) plus separate data in (SI) and data out (SO) lines. Access to the device is controlled through a chip select (CS) input, allowing any number of devices to share the same bus. The X25C02 also features two additional inputs that provide the end user with added flexibility. By asserting the HOLD input, the X25C02 will ignore transitions on its inputs, thus allowing the host to service higher priority interrupts. The WP input can be used as a hardwire input to the X25C02 disabling all write attempts, thus providing a mechanism for limiting end user capability of altering the memory. The X25C02 utilizes Xicor’s patented design and manufacturing techniques, including advanced automated processes, to ensure outstanding performance and reliability.

This document describes the features and characteristics of the 5 Watts WT Series products, including 2:1 input range, isolated outputs, efficiency up to 82%, input π filter, fully regulated outputs, etc.

This is a PDF file with Powered by ICminer.com Electronic-Library Service CopyRight 2003 Powered by ICminer.com Electronic-Library Service CopyRight 2003 Powered by ICminer.com Electronic-Library Service CopyRight 2003 Powered by ICminer.com Electronic-Library Service CopyRight 2003 content

This document is the datasheet of Vishay Electro-Films BCR series single-value back-contact resistors. This series of resistors is one of the smallest chip resistors available in the market. It has the advantages of small size, low power consumption, and high reliability. It is suitable for hybrid packages with limited space.

This product is a single-chip system frequency synthesizer for VIA K7 chipset. It features maximized EMI suppression, supports frequencies up to 200 MHz, and provides I2C™ interface for programming.

The VS-500 is a SAW based voltage controlled oscillator that operates at the fundamental frequency of the internal SAW filter. This resonator is a high Q quartz device that enables the circuit to achieve low phase jitter performance over a wide operating temperature range. The oscillator is housed in a hermetically sealed J-lead surface mount package offered on tape and reel. It has an output disable to facilitate on-board testing.

VPR220SZ is an ultra-high precision Z-Foil surface mount power resistor in TO-220 configuration with a TCR of ±0.05 ppm/°C, tolerance of ±0.01%, and power rating of up to 8W. Made from Vishay Bulk Metal® Z-Foil, this resistor offers very low TCR, high stability, tight tolerance, low PCR, and fast response time. It is designed to provide a high degree of stability and accuracy in fixed resistor applications.

VNN7NV04 / VNS7NV04 / VND7NV04 / VND7NV04-1 are fully autoprotected power MOSFETs with features such as linear current limitation, thermal shutdown, short circuit protection, integrated clamp, low current drawn from input pin, diagnostic feedback through input pin, ESD protection, and direct access to the gate of the power MOSFET (analog driving). They are designed for DC up to 50kHz applications.