Industrial

The Intersil HCS161MS Radiation Hardened Synchronous Counter is a 4-input binary synchronous counter from Intersil Corporation that features asynchronous reset and look-ahead carry logic. The counter has an active-low master reset to zero MR pin, and a low level on the synchronous parallel enable (SPE) pin disables counting and allows Q0 to be shifted to Q1.

This document describes the features and characteristics of the BZX84C2V4W to BZX84C39W series surface mount silicon zener diodes, including planar die construction, power dissipation, zener voltage range, and suitability for automated assembly processes.

The W39L040 is a 4Mbit, 3.3-volt only CMOS flash memory organized as 512K×8 bits. For flexible erase capability, the 4Mbits of data are divided into 8 uniform sectors of 64 Kbytes, which are composed of 16 smaller even pages with 4 Kbytes. The byte-wide (× 8) data appears on DQ7 − DQ0. The device can be programmed and erased in-system with a standard 3.3V power supply. A 12-volt VPP is not required. The unique cell architecture of the W39L040 results in fast program/erase operations with extremely low current consumption (compared to other comparable 3.3-volt flash memory products). The device can also be programmed and erased by using standard EPROM programmers.

IXEH 40N120 is a NPT3 IGBT with low saturation voltage, positive temperature coefficient, fast switching and short tail current. It is suitable for AC drives, DC drives and choppers, uninterruptible power supplies (UPS), switched-mode and resonant-mode power supplies as well as induction heating, cookers.

The W24129A is a high-speed, low-power CMOS static RAM organized as 16384 × 8 bits that operates on a single 5-volt power supply. This device is manufactured using Winbond's high performance CMOS technology. Features include high-speed access time, low-power consumption, fully static operation, inputs and outputs directly TTL compatible, three-state outputs.

JANSR2N7402 is a 3A, 500V, 2.70 Ohm, Rad Hard, N-Channel Power MOSFET from Intersil.

This document describes the 80C51 8-bit microcontroller family, including the 89C51/89C52/89C54/89C58 models with 4K/8K/16K/32K Flash memory, manufactured by Philips Semiconductors. It provides an overview of their features and characteristics.

The BZV55 series Zener diodes are silicon planar power Zener diodes for use as low voltage stabilizer or voltage reference. The Zener voltages are graded according to the international E 24 standard. Higher Zener voltages and 1% tolerance available on request. Diodes available in these tolerance series: ±2% BZV55-B, ±3% BZV55-F, ±5% BZV55-C.

This datasheet provides the characteristics and parameters of the BZV49 series, including rated working voltage, power range, and package type

This document is the datasheet for BZT52-C10 electronic component. BZT52-C10 is produced by ON Semiconductor. It is a silicon planar power zener diode. The zener voltage of BZT52-C10 is 10V with a tolerance of ±5%. The zener diode is packaged in SOD-123.

This data sheet provides information on the maximum operating voltage, output current, logic supply voltage, logic/reference input voltage range, load supply voltage, package power dissipation, operating temperature range, junction temperature range and storage temperature range of A3955SB and A3955SLB.

AM30K-I Series is a family of cost effective 30W output DC-DC converters from AIMTEC company. It has 21 models with input voltage range of 12V, 24V and 48VDC and output voltage range of 3.3V, 5V, 12V, 15V, ±5V, ±12V and ±15V. AM30K-I series has the features of high efficiency, short circuit protection, thermal shutdown, remote on-off control, soft start.

Am29LV800D Data Sheet provides detailed information on Spansion's memory products.