Industrial

The MX27L2000 is a 3V only, 2M-bit, One Time Programmable Read Only Memory. Its features are 256K words by 8 bits per word, 2.7V DC to 3.6V DC, +12.5V, 120/150/200/250 ns, static standby mode, completely TTL compatible, 20mA @ 3.6V, 5MHz.

This document describes the features of the MT Series Low Impedance Chip Ferrite Beads, including resistance to heat, humidity, mechanical shock, and pressure. It is suitable for applications such as power supply lines, IC power lines, and signal lines.

This document is about MSP430 family of ultralow power microcontrollers, which includes multiple series with different peripherals for various applications

This is a digital NTSC/PAL encoder that outputs analog composite video signals and analog S video signals. The scanning system can be selected as interlaced or non-interlaced. Since the MSM7650 is provided with pins dedicated to overlay function, text and graphics can be superimposed on a video signal. In addition, this encoder has an internal 9-bit DAC. So, when compared with using a conventional analog encoder, the number of components, the board space, and points of adjustment can greatly be reduced, thereby realizing a low cost and high-accuracy system. The host interface provided conforms to Philips's I2C specifications, which reduces interconnections between this encoder and mounting components. The internal synchronization signal generator (SSG) allows the MSM7650 to operate in master or slave mode.

The document introduces the MSK 5131 series voltage regulators, which feature ultra low dropout voltage, high efficiency and high current. The series can be used in system power supplies, switching power supply post regulators, battery powered equipment etc.

EDP EOP Series PC Board Mountable RFI Filters for General Purpose Applications have low leakage current for European safety requirements.

This document introduces the features and characteristics of CORCOM EMC series filters. This series of filters is a dual-stage filter with a maximum current rating of 30 amps. It has high performance and low cost, and is suitable for applications that require high performance.

FN 2080 is a single-phase multi-stage high performance EMI filter from Phoenix Contact, providing 1 to 16A rated currents, high differential and common-mode attenuation, good low frequency attenuation, optional medical versions (B type) and safety versions (A type)

The MV series answers the need for a medical filter to help equipment comply with increasing noise sources in medical applications while still meeting leakage current requirements of UL2601. Less strict than previous UL medical standards, UL2601 limits leakage current for patient care equipment. Due to the increased need for higher performance filtering, UL has allowed more leakage current than in previous standards. The MV takes advantage of this to offer improved line-to- ground performance in a moderately priced filter. Higher line-to-line performance is achieved through its additional differential mode rod inductors. Overall, the filter provides a good solution to emission and immunity problems, at a moderate cost, in a reasonable package size.

SK series 20, 30 and 40 amp high performance K series RFI power line filters, meets the FCC specifications in the USA and CISPR specifications in Europe. The SK series filters offer significantly higher performance than the K series, which makes this series particularly suited for equipment with high line-to-ground as well as line-to-line conducted emissions. The ESK models meet the very low leakage current requirements of SEV, VDE portable equipment and (120 Volt) UL544 nonpatient medical equipment. Models ESK6C and VSK6C additionally incorporate a separate ground-circuit inductor to isolate the equipment chassis from power line ground at RF frequencies.

The M series power entry modules offer the most choices of power entry components and filtering options to fit a specific need. The fully configured M series expands the options of a manufacturer whose products are marketed worldwide. One component, fully assembled and tested, provides the capability of interfacing a multi-voltage power supply to any common voltage or fusing scheme in the world, without modification. The IEC connector provides an internationally accepted power entry termination, which can be used with a variety of line cords. The selectable fuseholder allows use of single or dual European fuses, or a single North American fuse. The optional DPST on/off switch breaks both sides of the line and is labeled with the international I/O markings. The optional voltage selector provides a convenient means to change transformer primary connection, and it is available in both 2-voltage and 4-voltage configurations. The series is available with four filter circuits to meet a variety of applications, and convenient connections are provided on unfiltered models to allow wiring of a separate RFI filter. The M series is a family of components offering maximum flexibility and cost-effectiveness in the selection of primary power components. Wiring to the modules is accomplished via .110” terminals for labor savings and convenience. Four filter circuits provide a choice of attenuation tailored to specific categories o

The HT series power line filters provide superior common- mode and premium differential-mode attenuation to RFI noise on the frequency range from 10kHz to 30MHz, for IEC 60601 and UL2601 patient-connected equipment, as well as all other electronic equipment that cannot tolerate leakage current. They are a size- and cost-effective solution to the problem of meeting both medical leakage current limits and conducted emissions limits in equipment with high noise sources (such as switching power supplies).

CORCOM power line filters are designed to suppress switching power supply emissions down to 10 kHz.

CORCOM K Series RFI Power Line Filters are general purpose common-mode and differential-mode filters. They are effective in the control of line-to-line as well as line-to-ground RFI interference. The K series RFI filters are particularly suited in applications where pulsed, continuous and/or intermittent RFI interference is present. The EK models meet the very low leakage current requirements of VDE portable equipment, and (120 Volt) UL544 non-patient medical equipment.