Industrial

The AD9070 is a monolithic sampling analog-to-digital converter with an on-chip track-and-hold circuit and ECL digital interfaces. The product operates at a 100 MSPS conversion rate with outstanding dynamic performance over its full operating range. The ADC requires only a single –5 V supply.

The document describes a pressure sensor product with voltage output, on-chip amplification and temperature compensation, and pre-calibration. It is suitable for applications such as home health care, vacuum cleaners, and washing machines.

The AD9066 is a dual 6-bit ADC that has been optimized for low-cost in-phase and quadrature (I and Q) demodulators. Primary applications include digital direct broadcast satellite applications where broadband quadrature phase shift keying (QPSK) modulation is used. The AD9066 provides an internal voltage reference and operates from a single +5 volt power supply to reduce total system cost and power dissipation.

Introduces the features and characteristics of Xilinx XPLA PLD, including TotalCMOS PLD, Fast Zero Power design technique, IEEE 1149.1-compliant, JTAG Testing Capability, 5V, In-System Programmable (ISP), high speed pin-to-pin delays, ultra-low static power, 100% routable, four clocks, programmable clock polarity, support for asynchronous clocking, innovative XPLA™ architecture, 1000 erase/program cycles, 20 years data retention, logic expandable to 37 product terms, PCI compliant, Advanced 0.5µ E2CMOS process, Security bit prevents unauthorized access, Design entry and verification using industry standard and Xilinx CAE tools, Reprogrammable using industry standard design tools

The file is about Xilinx XCR3256XL CPLD datasheet, which contains features and specifications of the product

DS050 is a high-performance FPGA chip with 288 macrocells, 6400 usable gates, and small packages, including 144-pin TQFP (117 user I/O pins), 208-pin PQFP (168 user I/O pins), 280-pin CSP (192 user I/O pins), and 256-pin FBGA (192 user I/O pins). The chip is optimized for high-performance 2.5V systems, low power operation, and multi-voltage operation. The chip also has excellent system features, including in-system programmable, four separate output banks, FastCONNECT II™ switch matrix, extra wide 54-input Function Blocks, up to 90 product-terms per macrocell with individual product-term allocation, three global and one product-term clocks for local clock inversion, individual output enable per output pin, input hysteresis on all user and boundary-scan pin inputs, bus-hold circuitry on all user pin inputs, full IEEE Standard 1149.1 boundary scan (JTAG) function, fast concurrent programming, slew rate control on individual outputs, enhanced data security features. The chip has excellent quality and reliability, with endurance exceeding 10,000 program/erase cycles, data retention of 20 years, and ESD protection exceeding 3000V/m.

The XC9509 series consists of a step-down DC/DC converter and a high-speed LDO regulator connected in parallel with the DC/DC converter's output. A voltage detector is also built-in.

The XC62FP series is a group of high-precision, low-power three-pin regulators that provide a high current output even when the input/output voltage differential is small.

The X9420 is a low noise/low power/SPI Bus single digitally controlled (XDCP™) potentiometer with a SPI serial interface. The potentiometer has a register-oriented format that enables direct read/write/transfer of wiper positions and storage of as many as four positions per potentiometer. The potentiometer is powered by VCC = 2.7V to 5.5V, V+ = 2.7V to 5.5V, and V– = -2.7V to -5.5V. The potentiometer is a CMOS device with standby current of less than 1 µA. The potentiometer is highly reliable and can withstand 100,000 data changes per bit per register and register data retention of 100 years. The potentiometer has 8 bytes of nonvolatile EEPROM memory. The potentiometer's resistor arrays are 10kΩ or 2.5kΩ. The potentiometer's resolution is 64 taps per pot. The potentiometer's packages are 14Ld TSSOP and 16Ld SOIC. The potentiometer is available with lead-free and annealed finishes and is RoHS compliant.

The X80000 is a smart power plug with penta-power sequence controller and hot swap function. It contains three major functions: a power communications controller, a power sequencing controller, and a hotswap controller. The power communications controller allows smart power supply control via the backplane using the SMBus protocol. The system can check for voltage, current, and manufacturing ID compliance before board insertion. The power distribution network can monitor the status of the negative voltage supply, DC voltage supplies, and hardshort events by accessing the Fault Detection Register and General Purpose EEPROM of the device. Each device has a unique slave address for identification. The power sequencer controller time sequences up to five DC-DC modules. The X80000 allows for various hardwired configurations, either parallel or relay sequencing modes. The power good, enable and voltage good signals provide for flexible DC-DC timing configurations. Each voltage enable signal has a programmable delay. In addition, the voltage good signals can be monitored remotely via the fault detection register (thru the SMBus). The hot

X55060 is a battery monitoring chip produced by Intersil company, which has dual voltage monitoring, high and low level reset output, programmable reset threshold, low level output, system battery switching circuit, programmable watchdog timer, 64Kbits EEPROM, built-in inadvertent write protection circuit, 10MHz SPI interface and other features

This datasheet is the specification parameters of Xicor's X28HC64 8K x 8 Bit 5 Volt, Byte Alterable E2PROM product.

This file is an introduction of Xicor X2804C 5 Volt, Byte Alterable E2PROM, introducing its features and characteristics.

The WT8045 is a silicon monolithic circuit designed for synchronous signal processing and power saving detection of multi-sync display monitors, which can cope with many kinds of PC's and workstations. It can be applied to display monitors supporting standard IBM VGA, VESA super VGA and IBM 8514/A video modes. It can also be used in other high-end display monitors supporting non-standard video modes with user-defined horizontal/vertical frequency ranges. The WT8045 incorporates many functional circuits, including horizontal/vertical frequency discrimination, display mode selection, and synchronous pulse polarity and power saving detection, into this single chip IC. WT8045 is more convenient for you to shrink the PC board size and to reduce the material and labor cost with fewer components.