Industrial

The MAX3831/MAX3832 are 4:1 multiplexers (muxes) and 1:4 demultiplexers (demuxes) with automatic channel assignment.

The MAX3465–MAX3469 are high-speed differential bus transceivers for RS-485 and RS-422 communications. They are designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.11, and X.27 standards. The transceiver complies with the Profibus specification providing +2.1V minimum output level with a 54Ω load, 40Mbps data rate, and output skew less than 2ns. Each part contains one three-state differential line driver and one differential input line receiver. The devices operate from a +5V supply and feature true fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This enables all receiver outputs on a terminated bus to output logic highs when all transmitters are disabled. All devices feature a 1/4-standard-unit load receiver input impedance that allows 128 transceivers on the bus. Driver and receiver propagation delays are guaranteed under 20ns for multidrop, clock distribution applications. Drivers are short-circuit current limited and are protected against excessive power dissipation by thermal-shutdown circuitry. The driver and receiver feature active-high and active-low enables, respectively, that can be connected together externally to serve as a direction control. Applications include High-Speed RS-485 Communications, High-Speed RS-422 Communications, Level Translators, Industrial-Control Local Area Networks, and Profibus Applications.

The MAX2820/MAX2821 evaluation kits simplify testing of the MAX2820/MAX2821. The EV kits provide 50Ω SMA connectors for all RF and baseband inputs and outputs. Differential-to-single-ended and single-ended-to-differential line drivers are provided to convert the differential I/Q baseband inputs and outputs to single ended. The EV kits simplify evaluation of the MAX2820/MAX2821s’ receive and transmit performance in 802.11b applications operating in the 2.4GHz to 2.5GHz ISM band.

The MAZ4000 series (MA4000 series) is a silicon planar type zener diode used for power supply stabilization. Its features are high reliability, the ability to be inserted into a 5 mm pitch hole, finely divided zener-voltage ranks, sharp rising performance, and a wide voltage range (VZ = 2.0 V to 39 V).

M54/74HCT86 is a high-performance CMOS quad exclusive or gate with input buffers and output buffers. The input has electrostatic protection circuits and overvoltage protection circuits. The output has a 10 LSTTL load capacity.

This 2005 PDF document is Samsung's DDR2 memory module specification manual, which provides detailed information on the features and characteristics of Samsung's 256MB, 512MB and 1GB DDR2 memory modules.

The M37733S4LHP is a microcomputer using the 7700 Family core. This microcomputer has a CPU and a bus interface unit. The CPU is a 16-bit parallel processor that can be an 8-bit parallel processor, and the bus interface unit enhances the memory access efficiency to execute instructions fast. This microcomputer also includes a 32 kHz oscillation circuit, in addition to the RAM, multiple-function timers, serial I/O, A-D converter, and so on. Its strong points are the low power dissipation, the low supply voltage and the small package.

M36W108AT and M36W108AB are 8Mbit(1Mb x8, Boot Block)Flash Memory and 1Mbit(128Kb x8)SRAM Low Voltage Multi-Memory Product.

M36L0R7050T0/B0 is a 128 Mbit (Multiple Bank, Multi-Level, Burst) Flash Memory and 32 Mbit (2M x16) PSRAM, 1.8V Supply Multi-Chip Package, supports Synchronous Burst Read mode, 54MHz, Asynchronous Page Read mode, Random Access: 85ns, 10µs typical Word program time using Buffer Program, Multiple Bank Memory Array: 8 Mbit Banks, Parameter Blocks (Top or Bottom location), All blocks locked at power-up, Any combination of blocks can be locked with zero latency, WPF for Block Lock-Down, Absolute Write Protection with VPPF = VSS, 100,000 PROGRAM/ERASE CYCLES per BLOCK.

M36D0R6040T0 M36D0R6040B0 64 Mbit (4Mb x16, Multiple Bank, Page) Flash Memory and 16 Mbit (1Mb x16) PSRAM, Multi-Chip Package

This document describes the features and characteristics of the 8 Mbit flash memory models M29F800DT and M29F800DB, including supply voltage, access time, programming time, memory block quantity, programming/erase controller, unlock bypass program command, etc.

This document describes the features and characteristics of the M29F040 4 Mbit single supply flash memory product, including supply voltage, access time, programming and erase time, block erase, low power consumption, data retention time, etc.