Industrial

PDM41256 is a 32K x 8-bit CMOS static RAM with high-speed access times, low power operation, single +5V power supply, TTL-compatible inputs and outputs. It can be used in 28-pin plastic TSOP and 28-pin 300-mil plastic SOJ packages.

The document introduces the PDIUSBD11 USB device with a serial interface. It complies with the Universal Serial Bus specification Rev. 1.1, ACPI, OnNOW, and USB power management requirements. It is also compliant with USB Human Interface Devices and Monitor Control Class. The PDIUSBD11 integrates a Serial Interface Engine, FIFO memory, and transceivers, and has automatic USB protocol handling. It has a high-speed I2C interface (up to 1 Mbit/s) and is compatible with the PDIUSBH11 software. Additionally, it features a low-frequency 12 MHz crystal oscillator, programmable output clock frequency, bus powered capability with low suspend current, and a single 3.3 V supply with 5 V tolerant I/O. It is available in 16-pin DIP and SO packages.

The PD55015 is a high gain, broad band commercial and industrial application N-Channel enhancement-mode lateral Field-Effect RF power transistor. It operates at 12V in common source mode at frequencies of up to 1GHz. PD55015 boasts the excellent gain, linearity and reliability of ST’s latest LDMOS technology mounted in the first true SMD plastic RF power package, PowerSO-10RF. PD55015’s superior linearity performance makes it an ideal solution for car mobile radio. The PowerSO-10 plastic package, designed to offer high reliability, is the first ST JEDEC approved, high power SMD package. It has been specially optimized for RF needs and offers excellent RF performances and ease of assembly.

PCN series is a connector of MOLEX, which has a variety of types such as straight through hole, stacking hole, bending hole, press fit, etc., to meet different application needs

PCM1748 is a 24-bit digital-to-analog converter chip from Texas Instruments, with 8-level amplitude quantization and fourth-order noise shaping technology, supporting 16- to 24-bit data and supporting 5kHz to 100kHz sampling rates.

PCF1179C is a 4-digit duplex LCD car clock produced by Philips Semiconductors.

This document describes the features and characteristics of the Automotive Twin PCB Power Relay, including a 20 Amp continuous current capacity, up to 60 Amp switching capacity, four different contact materials available, six different contact forms, designed for high inrush applications, UL Class F insulation available, PC617 dust cover or sealed version available.

The 83C750/87C750 is a family of 80C51 architecture microcontrollers from Philips Semiconductors with 1K/64 OTP/ROM and low pin count. They are suitable for logic replacement, consumer and industrial applications.

This is a monitor microcontroller product with DDC interface, auto-sync detection and sync processing function.

P10SG-XXXXZ is a 1KV isolated 2W dual output regulator from Peak Electronics. Its input voltage range is 5, 12 and 24 VDC, and output voltage range is (+/-) 3.6, 5, 7.2, 12, 15 and 18 VDC.

NEC's NX8563LA Series is a 1 550 nm Multiple Quantum Well (MQW) structured Distributed Feed-Back (DFB) laser diode module with Single Mode Fiber. It is designed as directly modulation light source and ideal for optical transmission systems. The device is available for Dense Wavelength Division Multiplexing (DWDM) wavelengths based on ITU-T recommendations, enabling a wide range of applications.

The NX8562 series CW InGaAsP MQW DFB laser diode module is a 1550 nm Multiple Quantum Well (MQW) Distributed Feedback (DFB) laser diode with Polarization Maintain Fiber (PMF). This device is designed as a Continuous Wave (CW) light source and is ideal for optical transmission systems in which external modulators are used.

This document introduces the NTLTD7900ZR2 Power MOSFET, which is a logic level N-channel Micro8 Leadless EZFETs™ power MOSFET with monolithic back-to-back Zener diode protection. This MOSFET features ultra low RDS(on) and true logic level performance. It is designed for low voltage, high speed switching applications that require high power efficiency and extended battery life. Typical applications include DC-DC converters, and power management in portable and battery powered products such as computers, printers, cellular and cordless phones.

NTE1072 is an integrated circuit used for FM-AM IF amplifier and AF amplifier. It features a supply voltage of 7.5V, circuit current of 20mA, and power dissipation of 300mW.