Industrial

The document provides information about power transistors in TO-202 case, including NPN and PNP types. Some transistors have a Darlington configuration. The document lists the current, power dissipation, breakdown voltage, current gain, saturation voltage, and frequency response of these products.

The document describes a product called BY16, which is a silicon rectifier. Its features include a nominal current of 3A, a repetitive peak reverse voltage of 200...2000V, a plastic case, a weight of approximately 1g, and a plastic material with UL classification 94V-0.

P6SMBJ series surface mount transient voltage suppressor has a rated voltage range of 5.0 to 170 volts and a peak power pulse of 600 watts. The product has excellent clamping capability, low repetition rate and high response time.

The document describes a voltage suppressor for LAN protection applications, which is optimized for ESD protection and EFT protection of data lines. The product features a low profile package with built-in strain relief for surface mounted applications. It has a glass passivated junction, low incremental surge resistance, and excellent clamping capability. The product also has a 400W peak pulse power capability, very fast response time, and high temperature soldering guarantee.

This file is about SMAJ series surface mount transient voltage suppressor parameters, including rated power, peak current, maximum instantaneous voltage, operating temperature range.

This document is about the technical specifications of SMAJ5.0 THRU SMAJ170CA SMA ( DO-214AC) product, mainly including the rated voltage, rated current, peak surge current, and continuous power parameters

The MAX456 is the first monolithic CMOS 8 x 8 video crosspoint switch that significantly reduces component count, board space, and cost. The crosspoint switch contains a digitally controlled matrix of 64 T-switches that connect eight video input signals to any, or all, output channels. Each matrix output connects to eight internal, high-speed (250V/µs), unity-gain-stable buffers capable of driving 400Ω and 20pF to ±1.3V. For applications requiring increased drive capability, the MAX456 outputs can be connected directly to two MAX470 quad, gain-of-two video buffers, which are capable of driving 75Ω loads. Three-state output capability and internal, programmable active loads make it feasible to parallel multiple MAX456s and form larger switch matrices. In the 40-pin DIP package, crosstalk (70dB at 5MHz) is minimized, and board area and complexity are simplified by using a straight-through pinout. The analog inputs and outputs are on opposite sides, and each channel is separated by a power-supply line or quiet digital logic line.

SDK02 is a 60V N-channel MOSFET with built-in flyback diode. It has a maximum voltage of 60V, a rated current of 2A, a maximum current of 3A, and a peak current of 2.5A with a switching frequency of 1MHz.

SDK03M is a dual-phase stepper motor unipolar driver IC from STMicroelectronics. Its features include: wide input voltage range, support 2-Phase/1-2 Phase Excitation, small control current, large drive current, short switching time, wide working temperature range, and low power consumption.

The MAX4539/MAX4540 are low-voltage CMOS 8-channel (MAX4539) and dual 4-channel (MAX4540) multiplexers ideal for precision ADC calibration and system self-monitoring applications. These calibration multiplexers (cal-muxes) have precision resistor-dividers to generate accurate voltage ratios from an input reference voltage. The reference ratios include 15/4096 and 4081/4096 of the external reference voltage, accurate to 15 bits, and 1/2V+ and 5/8(V+ - V-), accurate to 8 bits. The external reference voltage as well as ground can also be switched to the output.

The document describes the features and characteristics of the SDK04 product. The SDK04 is an N-channel general purpose transistor with a drain-source voltage of 100V and a gate-source voltage of ±20V. The maximum drain current is 2A, and the pulse drain current is 5A. The SDK04 has a maximum power dissipation of 3W and a maximum operating temperature of 150°C. The document also includes some electrical parameters and characteristic curves.

SDK06 is a surface-mount MOS FET array with a maximum rated voltage of 52V and a maximum rated current of 3A. It features a low on-resistance (RDS(ON)), low switching losses and high gate drive capability. It is suitable for a variety of applications such as switch-mode power supplies, motor drives and battery chargers.