Industrial

The document introduces the supplier information of IR207DM, mainly introduces the type, brand and supplier of IR207DM

The IR20153S is a high voltage, high speed power MOSFET driver. It features a floating channel, tolerance to negative transient voltage, dV/dt immunity, gate drive supply range of 5V to 20V, undervoltage lockout, internal recharge FET for bootstrap refresh, internal deadtime of 11µs and 0.8µs, CMOS Schmitt-triggered input logic, output out of phase with input, reset input, split pull-up and pull-down gate drive pins.

IR2011 is a high power, high speed power MOSFET driver with independent high and low side referenced output channels, ideal for Audio Class D and DC-DC converter applications.

The IR2010 is a high power, high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels, ideal for Audio Class D and DC-DC converter applications.

The IR2010 is a high power, high voltage, high speed power MOSFET and IGBT driver with independent high and low side referenced output channels, ideal for Audio Class D and DC-DC converter applications. Logic inputs are compatible with standard CMOS or LSTTL output, down to 3.0V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation de- lays are matched to simplify use in high frequency applications. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configura- tion which operates up to 200 volts. Proprietary HVIC and latch immune CMOS tech- nologies enable ruggedized monolithic construction.

MC74AC10/MC74ACT10 is a triple 3-input Nand gate in the MC74 series. It has a high output voltage, and its input voltage range is -0.5 to VCC +0.5 V. The input current is ±20 mA and the output current is ±50 mA.

MC74AC109/74ACT109 are two high-speed, completely independent transition clocked JK flip-flops

MC74AC08, MC74ACT08 Quad 2-Input AND Gate Outputs Source/Sink 24 mA 'ACT08 Has TTL Compatible Inputs Pb-Free Packages are Available

MC74AC08 and MC74ACT08 are quad 2-input AND logic gates with output drive capability of 24 mA. MC74ACT08 has TTL compatible inputs.

The MC74AC/ACT05 is a device that is pin-compatible with the LS05. The device inputs are compatible with standard CMOS outputs and, with pull-up resistors, they are compatible with TTL outputs. The outputs can source/sink 24 mA, and the ′ACT05 has TTL-compatible inputs.

MC74AC02/MC74ACT02 is a digital logic device of the MC74 series, belonging to a quad 2-input NOR gate, with an output current of up to 24mA, and can be compatible with TTL circuits

This document describes the characteristics of MC74AC00 and MC74ACT00, two quad 2-input NAND gates. They have TTL compatible inputs and can output a current of 24mA. The maximum ratings include VCC from -0.5V to +7V, input/output voltage from -0.5V to VCC+0.5V, maximum input current of ±20mA, and maximum output sink/source current of ±50mA.

The NCP1200 is a PWM current-mode controller for low-power universal off-line supplies from Semiconductor Components Industries, LLC. It is housed in SOIC-8 or PDIP-8 packages, and features a small size, low power consumption, and low noise.

NCP1200A is a PWM current-mode controller that can achieve low standby power for universal offline power supplies. It is housed in SOIC-8 or PDIP-8 package, and can reduce optocoupler current while increasing drive capability. Due to its novel concept, the circuit can implement complete offline AC-DC adapters, battery charger or a SMPS where standby power is a key parameter. The controller operates at a fixed 40 kHz, 60 kHz or 100 kHz, and supplies itself from the high-voltage rail, avoiding the need for an auxiliary winding. This feature naturally eases the designer's task in battery charger applications. Finally, current-mode control provides an excellent audio-susceptibility and inherent pulse-by-pulse control. When the current setpoint falls below a given value, e.g. the output power demand diminishes, the IC automatically enters the so-called skip cycle mode and provides excellent efficiency at light loads. Because this occurs at a user adjustable low peak current, no acoustic noise takes place. The NCP1200A features an efficient protective circuitry which, in presence of an overcurrent condition, disables the output pulses while the device enters a safe burst mode, trying to restart. Once the default has gone, the device auto-recovers.