National Semiconductor manuals, page 18
National DS90C402 handbook
DS90C402 is a dual low voltage differential signaling (LVDS) receiver from National Semiconductor Corporation. It features ultra low power dissipation and can operate at data rates up to 155.5 Mbps.
National DS90C401 handbook
The DS90C401 is a dual driver device optimized for high data rate and low power applications. This device along with the DS90C402 provides a pair chip solution for a dual high speed point-to-point interface. The DS90C401 is a current mode driver allowing power dissipation to remain low even at high frequency. In addition, the short circuit fault current is also minimized. The device is in a 8 lead small outline package. The differential driver outputs provides low EMI with its low output swings typically 340 mV.
National semiconductor DS90CF383B +3.3V Programmable LVDS Transmitter 24-Bit Flat Panel Display (FPD) Link-65 MHz handbook
DS90CF383B is a +3.3V programmable LVDS transmitter from ST. It supports 24-bit FPD link and transmit frequency up to 65MHz. This device uses falling edge trigger, and can be used with DS90CF386 (falling edge trigger receiver) to solve the EMI and cable size problems associated with wide, high speed TTL interfaces.
National semiconductor DS90C387A/DS90CF388A Dual Pixel LVDS Display Interface FPD-Link handbook
The DS90C387A/DS90CF388A transmitter/receiver pair is designed to support dual pixel data transmission between Host and Flat Panel Display up to QXGA resolutions. The transmitter converts 48 bits (Dual Pixel 24-bit color) of CMOS/TTL data and 3 control bits into 8 LVDS (Low Voltage Differential Signalling) data streams. At a maximum dual pixel rate of 112MHz, LVDS data line speed is 784Mbps, providing a total throughput of 5.7Gbps (714 Megabytes per second). The LDI chipset is improved over prior generations of FPD-Link devices and offers higher bandwidth support and longer cable drive. To increase bandwidth, the maximum pixel clock rate is increased to 112 MHz and 8 serialized LVDS outputs are provided. Cable drive is enhanced with a user selectable pre-emphasis feature that provides additional output current during transitions to counteract cable loading effects. The DS90C387A transmitter provides a second LVDS output clock. Both LVDS clocks are identical. This feature supports backward compatibility with the previous generation of FPD-Link Receivers - the second clock allows the transmitter to interface to panels using a 'dual pixel' configuration of two 24-bit or 18-bit FPD-Link receivers. This chipset is an ideal means to solve EMI and cable size problems for high-resolution flat panel applications.
National Semiconductor DS90C387/DS90CF388 Dual Pixel LVDS Display Interface (LDI)-SVGA/QXGA handbook
DS90C387/DS90CF388 Dual Pixel LVDS Display Interface (LDI)-SVGA/QXGA General Description
National Semiconductor DS90C385A +3.3V Programmable LVDS Transmitter 24-Bit Flat Panel Display Link-87.5 MHz handbook
DS90C385A +3.3V Programmable LVDS Transmitter 24-Bit Flat Panel Display Link-87.5 MHz
National Semiconductor DS90C383B +3.3V Programmable LVDS Transmitter 24-Bit Flat Panel Display (FPD) Link-65 MHz handbook
The DS90C383B is a +3.3V programmable LVDS transmitter that supports 24-bit flat panel display (FPD) links-65 MHz
National Semiconductor DS90C383A/DS90CF383A +3.3V Programmable LVDS Transmitter 24-Bit Flat Panel Display (FPD) Link-65 MHz +3.3V LVDS Transmitter 24-Bit Flat Panel Display (FPD) Link-65 MHz handboo
The DS90C383A/DS90CF383A +3.3V Programmable LVDS Transmitter is a device that converts 28 bits of CMOS/TTL data into four LVDS data streams. It features high-speed transmission and low power consumption, making it suitable for flat panel display applications.
National Semiconductor DS90C383/DS90CF384 +3.3V Programmable LVDS Transmitter 24-Bit Flat Panel Display (FPD) Link 65 MHz +3.3V LVDS Receiver 24-Bit Flat Panel Display (FPD) Link 65 MHz
DS90C383/DS90CF384 is a +3.3V programmable LVDS transmitter and receiver for a 24-bit flat panel display (FPD) link. They support a clock frequency of 65 MHz and utilize high-speed data transmission and low voltage differential signaling technology. The transmitter converts 28 bits of LVCMOS/LVTTL data into four LVDS data streams while transmitting a phase-locked clock. The receiver converts the LVDS data streams back into 28 bits of LVCMOS/LVTTL data. They are ideal for solving EMI and cable size problems associated with wide, high-speed TTL interfaces.
National Semiconductor DS90C385/DS90C365 +3.3V Programmable LVDS Transmitter 24-Bit Flat Panel Display (FPD) Link-85 MHz +3.3V Programmable LVDS Transmitter 18-Bit Flat Panel Display (FPD) Link-85 M
DS90C385 / DS90C365 is a 3.3V programmable LVDS transmitter that converts 24-bit or 18-bit LVCMOS / LVTTL data into four LVDS (low voltage differential signaling) data streams.
National Semiconductor DS90C365A +3.3V Programmable LVDS Transmitter 18-Bit Flat Panel Display Link-85 MHz handbook
The DS90C365A is a programmable LVDS transmitter designed for 18-bit flat panel display links with a transmission rate of 85 MHz. It converts 21 bits of LVCMOS/LVTTL data into four LVDS data streams and transmits a phase-locked transmit clock in parallel with the data streams over the fourth LVDS link. The transmitter can be triggered by either rising or falling edge strobe. This product is ideal for solving EMI and cable size problems associated with wide, high-speed TTL interfaces, and it supports spread spectrum clocking.
National Semiconductor DS90C385/DS90C365 +3.3V Programmable LVDS Transmitter 24-Bit Flat Panel Display (FPD) Link-85 MHz +3.3V Programmable LVDS Transmitter 18-Bit Flat Panel Display (FPD) Link-85
The data sheet introduces the DS90C385/DS90C365 +3.3V Programmable LVDS Transmitter 24-Bit Flat Panel Display (FPD) Link-85 MHz, +3.3V Programmable LVDS Transmitter 18-Bit Flat Panel Display (FPD) Link-85 MHz data sheet. The data sheet introduces the features and characteristics of the product.
National Semiconductor DS90C363B +3.3V Programmable LVDS Transmitter 18-Bit Flat Panel Display (FPD) Link -65 MHz handbook
The DS90C363B is a 3.3V programmable LVDS transmitter that converts 21 bits of CMOS/TTL data into three LVDS data streams. It supports a transmit clock frequency of 65 MHz, with a transmission rate of 455 Mbps per LVDS data channel, resulting in a data throughput of 170 Mbytes/sec. The transmitter can be programmed for rising edge or falling edge strobe mode through a dedicated pin. This product is ideal for solving EMI and cable size issues associated with wide, high-speed TTL interfaces.
National Semiconductor DS90C363A/DS90CF363A +3.3V Programmable LVDS Transmitter 18-Bit Flat Panel Display (FPD) Link-65 MHz +3.3V LVDS Transmitter 18-Bit Flat Panel Display (FPD) Link-65 MHz handboo
The DS90C363A/DS90CF363A +3.3V Programmable LVDS Transmitter is a transmitter that converts 21 bits of CMOS/TTL data into three LVDS data streams. It can transmit 18 bits of RGB data and 3 bits of LCD timing and control data at a rate of 455 Mbps per LVDS data channel with a clock frequency of 65 MHz.
National DS90C363/DS90CF364 handbook
The DS90C363/DS90CF364 is a TI company's 3.3V programmable LVDS transmitter and receiver that supports 20 to 65MHz shift clock, supports programmable transmitter (DS90C363) strobe select (rising or falling edge strobe), single 3.3V power supply, and low chip set (Tx + Rx) power consumption.