National Semiconductor manuals, page 23
National Semiconductor ADC08100 handbook
The ADC08100 is a low-power, 8-bit, monolithic analog-to-digital converter with an on-chip track-and-hold circuit. Optimized for low cost, low power, small size and ease of use, this product operates at conversion rates of 20 MSPS to 100 MSPS with outstanding dynamic performance over its full operating range while consuming just 1.3 mW per MHz of clock frequency. That’s just 130 mW of power at 100 MSPS. Raising the PD pin puts the ADC08100 into a Power Down mode where it consumes just 1 mW. The unique architecture achieves 7.4 Effective Bits with 41 MHz input frequency. The excellent DC and AC characteristics of this device, together with its low power consumption and single +3V supply operation, make it ideally suited for many imaging and communications applications, including use in portable equipment. Furthermore, the ADC08100 is resistant to latch-up and the outputs are short-circuit proof. The top and bottom of the ADC08100’s reference ladder are available for connections, enabling a wide range of input possibilities. The digital outputs are TTL/CMOS compatible with a separate output power supply pin to support interfacing with 3V or 2.5V logic. The digital inputs (CLK and PD) are TTL/CMOS compatible. The ADC08100 is offered in a 24-lead plastic package (TSSOP) and is specified over the industrial temperature range of −40˚C to +85˚C.
National Semiconductor ADC0808/ADC0809 8-Bit P Compatible A/D Converters with 8-Channel Multiplexer handbook
The ADC0808/ADC0809 is a monolithic CMOS device with an 8-bit analog-to-digital converter, 8-channel multiplexer, and microprocessor compatible control logic. It offers high speed, high accuracy, minimal temperature dependence, excellent long-term accuracy and repeatability, and consumes minimal power.
National semiconductor ADC08060 8-Bit 20 MSPS to 60 MSPS 1.3 mW/MSPS A/D Converter handbook
The ADC08060 is a low-power, 8-bit, monolithic analog-to-digital converter with an on-chip track-and-hold circuit. This product is optimized for low cost, low power, small size and ease of use, and operates at conversion rates of 20 MSPS to 70 MSPS with outstanding dynamic performance over its full operating range while consuming just 1.3 mW per MHz of clock frequency. That’s just 78 mW of power at 60 MSPS. Raising the PD pin puts the ADC08060 into a Power Down mode where it consumes just 1 mW. The unique architecture achieves 7.5 Effective Bits with 25 MHz input frequency. The excellent DC and AC charac- teristics of this device, together with its low power consump- tion and single +3V supply operation, make it ideally suited for many imaging and communications applications, includ- ing use in portable equipment. Furthermore, the ADC08060 is resistant to latch-up and the outputs are short-circuit proof. The top and bottom of the ADC08060’s reference ladder are available for connections, enabling a wide range of input possibilities. The digital outputs are TTL/CMOS compatible with a separate output power supply pin to support interfac- ing with 3V or 2.5V logic. The digital inputs (CLK and PD) are TTL/CMOS compatible. The ADC08060 is offered in a 24-lead plastic package (TSSOP) and is specified over the industrial temperature range of −40˚C to +85˚C.
National semiconductor ADC08061/ADC08062 500 ns A/D Converter with S/H Function Input Multiplexer handbook
The ADC08061/ADC08062 is a 500ns A/D converter with S/H function and input multiplexer.
National semiconductor ADC08031/ADC08032/ADC08034/ADC08038 8-Bit High-Speed Serial I/O A/D Converters with Multiplexer Options Voltage Reference Track/Hold Function handbook
ADC08031/ADC08032/ADC08034/ADC08038 8-Bit High-Speed Serial I/O A/D Converters with Multiplexer Options, Voltage Reference, and Track/Hold Function
National semiconductor ADC0801/ADC0802/ADC0803/ADC0804/ADC0805 8-Bit P Compatible A/D Converters handbook
ADC0801/ADC0802/ADC0803/ADC0804/ADC0805 8-Bit µP Compatible A/D Converters
National semiconductor ADC0801/ADC0802/ADC0803/ADC0804/ADC0805 8-Bit P Compatible A/D Converters datasheet
National Semiconductor ADC0800 8-Bit A/D Converter handbook
The ADC0800 is an 8-bit monolithic A/D converter using P-channel ion-implanted MOS technology. Its features include: low cost, 5V-10V input ranges, no missing codes, ratiometric conversion, fast TCe50ms, contains output latches, TTL compatible, supply voltages 5VDC and -12VDC, resolution 8 bits, linearity 1LSB, conversion speed 40 clock periods, clock range 50 to 800kHz.
national semiconductor LP2902/LP324 Micropower Quad Operational Amplifier handbook
The LP324 series consists of four independent, high gain internally compensated micropower operational amplifiers. These amplifiers are specially suited for operation in battery systems while maintaining good input specifications, and extremely low supply current drain. In addition, the LP324 has an input common mode range, and output source range which includes ground, making it ideal in single supply applications. These amplifiers are ideal in applications which include portable instrumentation, battery backup equipment, and other circuits which require good DC performance and low supply current.
national semiconductor LP124/LP2902/LP324 Micropower Quad Operational Amplifier handbook
This document is about the LP124 series of products, which are four independent high gain internally compensated micropower operational amplifiers produced by National Semiconductor Corporation.
National semiconductor LP324/LP2902 Micropower Quad Operational Amplifier handbook
LP324/LP2902 is a four-channel micropower operational amplifier produced by National Semiconductor Corporation. It has extremely low supply current, output power range and input common mode range, and is suitable for applications such as portable instrumentation, battery backup equipment, and other circuits that require good DC performance and low supply current.
National semiconductor LP311 Voltage Comparator handbook
National semiconductor LM317L 3-Terminal Adjustable Regulator handbook
The LM317L is an adjustable 3-terminal positive voltage regulator capable of supplying 100mA over a 1.2V to 37V output range. It is exceptionally easy to use and requires only two external resistors to set the output voltage
National semiconductor LM117HV/LM317HV 3-Terminal Adjustable Regulator handbook(1)
The LM117HV/LM317HV are adjustable 3-terminal positive voltage regulators capable of supplying in excess of 1.5A over a 1.2V to 57V output range. They are exceptionally easy to use and require only two external resistors to set the output voltage. Further, both line and load regulation are better than standard fixed regulators. Also, the LM117HV is packaged in standard transistor packages which are easily mounted and handled. In addition to higher performance than fixed regulators, the LM117HV series offers full overload protection available only in IC’s. Included on the chip are current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional even if the adjustment terminal is disconnected. Normally, no capacitors are needed unless the device is situated more than 6 inches from the input filter capacitors in which case an input bypass is needed. An optional output capacitor can be added to improve transient response. The adjustment terminal can be bypassed to achieve very high ripple rejections ratios which are difficult to achieve with standard 3-terminal regulators. Besides replacing fixed regulators, the LM117HV is useful in a wide variety of other applications. Since the regulator is “floating” and sees only the input-to-output differential voltage, supplies of several hundred volts can be regulated as long as the maximum input to o...
National semiconductor LM117HV/LM317HV 3-Terminal Adjustable Regulator handbook
LM117/LM317A/LM317 3-Terminal Adjustable Regulator General Description