National Semiconductor manuals, page 16
National Semiconductor LMX2324 PLLatinum 2.0 GHz Frequency Synthesizer for RF Personal Communications handbook
LMX2324 PLLatinum 2.0 GHz frequency synthesizer for RF personal communications
National Semiconductor LM231A/LM231/LM331A/LM331 handbook
National semiconductor LM221/LM321 Precision Preamplifiers handbook
The LM221 series is a precision preamplifier designed to operate with general purpose operational amplifiers to drastically decrease dc errors, drift, bias current, common mode, and supply rejection are more than a factor of 50 better than standard op amps alone. Furthermore, the added dc gain of the LM221 decreases the closed loop gain error. The LM221 series operates with supply voltages from 3V to 20V and has sufficient supply rejection to operate from unregulated supplies. The operating current is programmable from 5 mA to 200 mA so bias current, offset current, gain, and noise can be optimized for the particular application while still realizing very low drift. Super-gain transistors are used for the input stage so input error currents are lower than conventional amplifiers at the same operating current. Furthermore, the initial offset voltage is easily nulled to zero. The extremely low drift of the LM221 will improve accuracy on almost any precision dc circuit. For example, instrumentation amplifier, strain gauge amplifiers, and thermocouple amplifiers now using chopper amplifiers can be made with the LM221. The full differential input and high common-mode rejection are another advantage over choppers. For applications where low bias current is more important than drift, the operating current can be reduced to low values. High operating currents can be used.
National semiconductor LM2202 230 MHz Video Amplifier System handbook
LM2202 is a very high frequency video amplifier system intended for use in high resolution monochrome or RGB color monitor applications. In addition to the wideband video amplifier, the LM2202 contains a gated differential input black level clamp comparator for brightness control, a DC controlled attenuator for contrast control and a DC controlled sub contrast attenuator for drive control. The DC control for the contrast attenuator is pinned out separately to provide a more accurate control system for RGB color monitor applications. All DC controls offer a high input impedance and operate over a 0V to 4V range for easy interface to bus controlled alignment systems. The LM2202 operates from a nominal 12V supply but can be operated with supply voltages down to 8V for applications that require reduced IC package power dissipation characteristics.
National semiconductor LM119/LM219/LM319 High Speed Dual Comparator handbook
The LM119/LM219/LM319 High Speed Dual Comparator is a single monolithic chip that has high precision, high speed, and low input current.
National Semiconductor LM118/LM218/LM318 Operational Amplifiers handbook
The LM118/LM218/LM318 precision high speed operational amplifiers are designed for applications requiring wide bandwidth and high slew rate. They feature a factor of ten increase in speed over general purpose devices without sacrificing DC performance. The LM118 series has internal unity gain frequency compensation. This considerably simplifies its application since no external components are necessary for operation. However, unlike most internally compensated amplifiers, external fre- quency compensation may be added for optimum perfor- mance. For inverting applications, feedforward compensa- tion will boost the slew rate to over 150V/µs and almost double the bandwidth. Overcompensation can be used with the amplifier for greater stability when maximum bandwidth is not needed. Further, a single capacitor can be added to reduce the 0.1% settling time to under 1 µs. The high speed and fast settling time of these op amps make them useful in A/D converters, oscillators, active filters, sample and hold circuits, or general purpose amplifiers. These devices are easy to apply and offer an order of magnitude better AC performance than industry standards such as the LM709. The LM218 is identical to the LM118 except that the LM218 has its performance specified over a −25˚C to +85˚C tem- perature range. The LM318 is specified from 0˚C to +70˚C.
National semiconductor LM20EP Enhanced Plastic 2.4V 10 A SC70 micro SMD Temperature Sensor handbook
LM20EP Enhanced Plastic 2.4V, 10µA, SC70, micro SMD Temperature Sensor is a precision analog output CMOS integrated circuit temperature sensor produced by National Instruments Corporation. The working temperature range is -55˚C to +130˚C, and the power supply operating range is +2.4 V to +5.5 V. The output signal of the sensor is linearly related to the temperature, and the linearity of the output signal is ±1.5˚C. The power consumption is less than 10µA, and the self-heating in the static state is less than 0.02˚C.
National LM2005 handbook
The LM2005 is a dual high power amplifier designed for automotive applications. It has high current capability (3.5A), delivering 10W/channel into 2X (LM2005T-S) or 20W bridged monaural (LM2005T-M) into 4X, with low distortion, low noise, and high peak current capability.
National LM2002/2002A handbook
This document is a copyright statement.
National Semiconductor CGS74C2525 # CGS74CT2525 CGS74C2526 # CGS74CT2526 1-to-8 Minimum Skew Clock Driver handbook
1-to-8 minimum skew clock driver, is National Semiconductor Corporation's CSG series products, used for signal generation and clock distribution, with guaranteed pin-to-pin and part-to-part skew, can be used as military versions
National DS90CR286A/DS90CR216A handbook(1)
DS90CR286A and DS90CR216A are +3.3V rising edge data strobe LVDS receivers that convert LVDS data streams into parallel CMOS/TTL data. This chipset is an ideal solution for solving EMI and cable size problems associated with wide, high-speed TTL interfaces.
National DS90CR286A/DS90CR216A handbook
The DS90CR286A and DS90CR216A are +3.3V rising edge data strobe LVDS receivers that convert LVDS data streams into parallel CMOS/TTL data streams. This chipset is an ideal solution for EMI and cable size problems associated with wide, high-speed TTL interfaces.
National DS90CR215/DS90CR216 handbook(1)
DS90CR215/DS90CR216 +3.3V Rising Edge Data Strobe LVDS 21-Bit Channel Link - 66 MHz Product Overview
National DS90CR215/DS90CR216 handbook
The DS90CR215/DS90CR216 is a +3.3V rising edge data strobe 21-bit channel link that uses LVDS technology for data transmission. The product features high-speed transmission, stable signals, and low cable requirements.
National DS90CR213/DS90CR214 handbook
The DS90CR213/DS90CR214 21-Bit Channel Link—66 MHz is a 21-bit channel link chipset from Texas Instruments. The chip supports 66MHz clock and can provide up to 1.386Gbit/s data throughput.