National Semiconductor manuals, page 19
National DS90C3202 handbook
The DS90C3202 is a 3.3V single/dual FPD-Link 10-bit color receiver is designed to be used in Liquid Crystal Display TVs, LCD Monitors, Digital TVs, and Plasma Display Panel TVs
National DS90C3201 handbook
The DS90C3201 is a 3.3V single/dual FPD-Link 10-bit color transmitter designed for use in Liquid Crystal Display TVs, LCD Monitors, Digital TVs, and Plasma Display Panel TVs. The DS90C3201 is designed to interface between the digital video processor and the display device using the low-power, low-EMI LVDS (Low Voltage Differential Signaling) interface. The DS90C3201 converts up to 70 bits of LVCMOS/LVTTL data into ten LVDS data streams. The transmitter can be programmed clocking data with rising edge or falling edge clock. Optional two-wire serial programming allows fine tuning in development and production environments. At a transmitted clock frequency of 135 MHz, 70 bits of LVCMOS/LVTTL data are transmitted at an effective rate of 945 Mbps per LVDS channel. Using a 135 MHz clock, the data throughput is 9.45 Gbit/s (945 Mbytes/s). This allows the dual 10-bit LVDS Transmitter to support HDTV resolutions.
National DS90C2501 handbook
The DS90C2501 is a highly integrated scaling IC with LVDS transmitter with a scaled resolution up to SXGA+ for single pixel input.
National DS90C032B handbook
The DS90C032B is a quad CMOS differential line receiver designed for applications requiring ultra low power dissipation and high data rates. The device is designed to support data rates in excess of 155.5 Mbps (77.7 MHz) utilizing Low Voltage Differential Signaling (LVDS) technology.
National DS90C032 handbook
The DS90C032 is a low power, high speed, quad channel LVDS receiver from Texas Instruments.
National DS90C031B handbook
The DS90C031B is a quad CMOS differential line driver designed for applications requiring ultra low power dissipation and high data rates. The device is designed to support data rates in excess of 155.5 Mbps (77.7 MHz) utilizing Low Voltage Differential Signaling (LVDS) technology. The DS90C031B accepts TTL/CMOS input levels and translates them to low voltage (350 mV) differential output signals. In addition the driver supports a TRI-STATE® function that may be used to disable the output stage, disabling the load current, and thus dropping the device to an ultra low idle power state of 11 mW typical. In addition, the DS90C031B provides power-off high impedance LVDS outputs. This feature assures minimal loading effect on the LVDS bus lines when VCC is not present. The DS90C031B and companion line receiver (DS90C032B) provide a new alternative to high power pseudo-ECL devices for high speed point-to-point interface applications.
National DS90C031 handbook
The DS90C031 is a quad CMOS differential line driver designed by National Semiconductor Corporation for applications requiring ultra low power dissipation and high data rates. The device is designed to support data rates in excess of 155.5 Mbps (77.7 MHz) utilizing Low Voltage Differential Signaling (LVDS) technology. The DS90C031 accepts TTL/CMOS input levels and translates them to low voltage (350 mV) differential output signals. In addition, the driver supports a TRI-STATE® function that may be used to disable the output stage, disabling the load current, and thus dropping the device to an ultra low idle power state of 11 mW typical.
National COP87L88RW handbook
National COP87L88RG handbook
The COP87L88RG is a member of the COP8TM OTP microcontroller family with 32 Kbytes of program memory. It is pin and software compatible to the mask ROM COP888GG product family.
National COP87L88KG handbook(1)
COP87L88KG 8-bit OTP microcontroller with UART and Three Multi-Function Timers
National COP87L88KG handbook
The COP87L88KG OTP microcontroller is a member of the COP8TM feature family using an 8-bit core architecture. It is pin and software compatible to the mask ROM COP888KG product family.
National semiconductor COP87L88GG 8-Bit One-Time Programmable (OTP) Microcontroller handbook
COP87L88GG OTP microcontroller is an 8-bit one-time programmable (OTP) microcontroller with UART and three multi-function timers
National semiconductor COP87L88GD/RD Family 8-Bit CMOS OTP Microcontrollers with 16k or 32k Memory 8-Channel A/D with Prescaler handbook
COP87L88GD/RD OTP (One Time Programmable) Family microcontrollers are highly integratet COP8™ Fea- ture core devices with 16k or 32k memory and advanced features including an A/D Converter
National semiconductor COP87L88GD/RD Family 8-Bit CMOS OTP Microcontrollers handbook
The COP87L88GD/RD OTP (One Time Programmable) Family microcontrollers are highly integrated COP8™ Feature core devices with 16k or 32k memory and advanced features including an A/D Converter. These multi-chip CMOS devices are suited for applications requiring a full featured controller with an 8-bit A/D converter, and as pre-production devices for a masked ROM design. Pin and software compatible 16k ROM versions are available (COP888GD), as well as a range of COP8 software and hardware development tools. Family features include an 8-bit memory mapped architecture, 10 MHz CKI (-XE = crystal oscillator) with 1µs instruction cycle, three multi-function 16-bit timer/counters, MICROWIRE/PLUS™ serial I/O, one 8-bit/8-channel A/D converter with prescaler and both differential and single ended modes, two power saving HALT/IDLE modes, MIWU, idle timer, high current outputs, software selectable I/O options, WATCHDOG™ timer and Clock Monitor, 2.7V to 5.5V operation, program code security, and 44 pin package.
National semiconductor COP87L88EK/RK Family 8-Bit CMOS OTP Microcontrollers handbook
COP87L88EK/RK Family 8-Bit CMOS OTP Microcontrollers with 8k or 32k Memory, Comparator, and Single-slope A/D Capability