Analog Devices Manuals

The AD9352 is a fully integrated RF transceiver with integrated ADCs and DACs, designed for WiMAX/WiBro applications. It offers superior receiver sensitivity and highly linear transmitter characteristics, with features such as automatic gain control and transmit power control.

The AD9353 is a fully integrated WiMAX RF MxFE transceiver that integrates ADCs and DACs, operates in the 3.3 to 3.8 GHz band, and has a bandwidth of 3.5 to 20 MHz. The AD9353 has a low noise figure of 3.2 dB and a highly linear and spectrally pure transmitter.

The AD9355 is a dual-receiver, single-transmitter radio frequency (RF) transceiver that supports the IEEE 802.16 WiMAX/WiBro standard. It has a bandwidth of 3.5 MHz to 10 MHz, a receiver sensitivity of up to NF<3.5 dB, and a transmit power control range of 58 dB with a resolution of 0.25 dB.

The AD9354 is a radio frequency (RF) transceiver with a single integrated ADC and DAC, supporting the IEEE 802.16 WiMAX/WiBro standard. The bandwidth is 3.5 MHz < BW < 10 MHz, the receiver sensitivity is high, the noise figure is less than 3.5 dB, and it supports manual Rx gain and autonomous AGC mode. The transmitter has high linearity and spectral purity, the output power control range is 58 dB, and the resolution is 0.25 dB. It integrates a fractional-N synthesizer, the LO step size is 10 Hz, the LO integrated phase noise is less than 0.4°rms, and the automatic frequency correction accuracy is less than 0.012 ppm. It supports the industry-standard JESD-207 digital interface.

The AD9356 is a 2x2 MIMO RF transceiver that supports WiMAX/BWA/WiBRO/LTE bands, with bandwidth of 3.5-10MHz, superior receiver sensitivity with NF<3.2dB, highly linear and spectrally pure transmitter Tx EVM:-40dB, SNR:>130dB/Hz.

AD9357 is a 2x2 MIMO RF transceiver operating in the 3.3GHz to 3.8GHz band with a bandwidth of 3.5MHz to 10MHz. The transceiver integrates 12-bit ADCs and DACs, offers superior receiver sensitivity and high linearity and spectral purity.

The ADF7901 is a low power OOK/FSK UHF transmitter designed for use in RF remote control devices. It is capable of frequency shift keying (FSK) modulation on eight different channels, selectable by three external control lines. OOK modulation is performed by modulating the PA control line.

The ADF7012 is a low power FSK/GFSK/OOK/GOOK/ASK UHF transmitter designed for short-range devices (SRDs). The output power, output channels, deviation frequency, and modulation type are programmable by using four, 32-bit registers.

ADF7902 is a low power UHF receiver IC that supports 2 kbps data rate and 34.8 kHz frequency deviation. It operates at 5V and consumes 18.5mA of current.

The ADF7020 is a high performance, ISM band, FSK/ASK transceiver IC operating in the frequency range of 431 MHz to 478 MHz and 862 MHz to 956 MHz.

ADF7025 is a high performance ISM band transceiver IC from Analog Devices. It works in the frequency range of 431MHz-464MHz, 862MHz-870MHz and 902MHz-928MHz. It supports data rates of 9.6kbps to 384kbps, FSK. The operating voltage is 2.3V-3.6V, and the output power can be programmed from -16dBm to +13dBm in 63 steps. The receiver sensitivity is -104.2dBm (38.4kbps), -100dBm (172.8kbps) and -95.8dBm (384kbps). The working current is 19mA (receive mode) and 28mA (transmit mode).

The ADF7022 is an io-homecontrol-compliant RF transceiver with features of low power, high performance, and low IF. It fully integrates the Layer 1, Layer 2, and time-critical elements of Layer 3 of the io-homecontrol protocol. It supports master, slave, and beacon modes, with automatic io-homecontrol channel scan, automatic CRC, preamble, start byte insertion/check, UART data encoding, and more. Additionally, it has features like low power modes, automatic address filtering, autonomous packet handling, etc., significantly increasing battery life.

ADF7021-V is a high performance, low power, narrow-band transceiver IC that integrates frequency synthesizer, filter, power amplifier, demodulator, coder, etc. The frequency range is 80MHz-960MHz, and the external VCO is used. The output power, IF filter bandwidth, modulation method, etc. can be configured.

This document describes the features and characteristics of the low power IEEE 802.15.4 zero-IF 2.4 GHz transceiver IC ADF7241, developed by Analog Devices.

ADF7023-J is a high performance, low power, ISM band FSK/GFSK/MSK/GMSK transceiver IC