Industrial Manuals

This application note introduces a method to enable DBS analysis of basic drugs on Agilent Bond Elut Dried Matrix Spotting (DMS) cards, which is achieved by optimizing desorption conditions.

File format: PDF Size:1637 KB

A method has been developed on the Agilent 7000 GC Triple Quadrupole GC/MS/MS system for the analysis of foods for 20 chemicals that may be present in printing inks applied to the external surface of cartonboard packaging material. These substances may diffuse through the cartonboard or set-off onto the food contact surface and then migrate into food. The method described is suitable for the reliable determination of ink substances in packed foods at single-figure parts-per-billion (ppb, µg/kg) levels.

File format: PDF Size:854 KB

File format: PDF Size:0 KB

This document describes a multi-residue analysis using an Agilent J&W FactorFour VF-35ms column for PAHs, PCBs, and OCPs. PAHs are compounds with two or more aromatic rings formed during incomplete combustion or pyrolysis of organic matter. OCPs are pesticides containing carbon, hydrogen, and chlorine atoms that break down slowly, persist in the environment, and bioaccumulate in organisms. PCBs are characterized by two phenyl groups with varying numbers of chlorine atoms and are used in various industrial and commercial applications. The method allows for the analysis of 16 EPA PAHs, 17 PCBs (including 6 EU marker PCBs), and 24 common OCPs in a single run at different concentration levels.

File format: PDF Size:274 KB

This application note demonstrates the performance of the Select PAH GC column for multi-residue analysis

File format: PDF Size:459 KB

This application note provides detailed instructions on how to use the Stratagene Mx3000P QPCR system to detect and quantify various agricultural and economically important fungi.

File format: PDF Size:87 KB

This Application Note describes the transfer of a United States Pharmacopeia (USP) method for prednisolone from normal phase HPLC to SFC using the Agilent 1260 Infinity Hybrid SFC/UHPLC System. The results show that the SFC method meets the system suitability criteria, is 4x faster, and results in 17x lower solvent expenses. Robustness tests on the SFC method demonstrate excellent robustness for routine analysis.

File format: PDF Size:765 KB

File format: PDF Size:636 KB

The LTC ®2435/2435-1 are 2.7V to 5.5V micropower 20-bit differential ∆Σ analog to digital converters with integrated oscillator, 3ppm INL and 0.8ppm RMS noise. They use delta-sigma technology and provide single cycle settling time for multiplexed applications. Through a single pin, the LTC2435 can be configured for better than 110dB input differential mode rejection at 50Hz or 60Hz ±2%, or it can be driven by an external oscillator for a user defined rejection frequency. The LTC2435-1 can be con- figured for better than 87dB input differential mode rejec- tion over the range of 49Hz to 61.2Hz (50Hz and 60Hz ±2% simultaneously). The internal oscillator requires no external frequency setting components. The converters accept any external differential reference voltage from 0.1V to VCC for flexible ratiometric and remote sensing measurement configurations. The full- scale differential input range is from –0.5VREF to 0VREF.

File format: PDF Size:467 KB

The LTC1983-3/LTC1983-5 are switching power supplies that can produce negative voltage outputs with a maximum output current of 100mA.

File format: PDF Size:177 KB

The LTC1591/LTC1597 are pin compatible, parallel input 14-bit and 16-bit multiplying current output DACs that operate from a single 5V supply. INL and DNL are accurate to 1LSB over the industrial temperature range in both 2- and 4- quadrant multiplying modes. True 16-bit 4-quadrant multiplication is achieved with on-chip 4-quadrant multiplication resistors. These DACs include an internal deglitcher circuit that reduces the glitch impulse to less than 2nV-s (typ). The asynchronous CLR pin resets the LTC1591/LTC1597 to zero scale and LTC1591-1/LTC1597-1 to midscale. The LTC1591/LTC1597 are available in 28-pin SSOP and PDIP packages and are specified over the industrial temperature range. For serial interface 16-bit current output DACs refer to the LTC1595/LTC1596 data sheet.

File format: PDF Size:371 KB

LTC1258-3/LTC1258-4.1 are micropower bandgap references that combine high accuracy and low drift with very low supply current and small package size. The combination of ultralow quiescent current and low dropout voltage of only 200mV max makes them ideal for battery-powered equipment. These references uses curvature compensation to obtain low temperature coefficient and trimmed thin-film resistors to achieve high output accuracy. These references can supply up to 10mA and sink up to 2mA, making them ideal for precision regulator applications.

File format: PDF Size:167 KB

This datasheet provides detailed information on the LTC1096/LTC1096L/LTC1098/LTC1098L micropower sampling 8-bit serial I/O A/D converters, including: 80µA maximum supply current, 1nA typical supply current in shutdown state, 8-pin SO plastic package, 5V operation, 3V operation, sample and hold, 16µs conversion time, 33kHz sample rate, ±0.5LSB total unadjusted error over temperature, direct 3-wire interface to most MPU serial ports and all MPU parallel I/O ports

File format: PDF Size:430 KB

LTC1068 Series Clock-Tunable Quad Second Order Filter Building Blocks

File format: PDF Size:512 KB

File format: PDF Size:0 KB

LT6200/LT6201 are single and dual ultralow noise, rail-to-rail input and output unity gain stable op amps that feature 0.95nV/√Hz noise voltage. These amplifiers combine very low noise with a 165MHz gain bandwidth, 50V/µs slew rate and are optimized for low voltage signal conditioning systems.

File format: PDF Size:545 KB

Littelfuse fuse reducers allow smaller size fuses to be installed into existing fuse clips. This prevents overfusing. They allow lower ampere-rated fuses to be used in existing fuse clips. They are simple to install, reduce inventory requirements, and have silver brazed joints for maximum strength.

File format: PDF Size:407 KB

The LP3872/LP3875 1.5A Fast Ultra Low Dropout Linear Regulators are developed on a CMOS process which allows low quies- cent current operation independent of output load current. These ultra low dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low voltage microprocessor applications.

File format: PDF Size:735 KB

This document is the datasheet of LNSK10 NTC thermistor. It mainly introduces the features, applications, packaging form, resistance range, power consumption and other information of the product.

File format: PDF Size:225 KB

The document is a datasheet of LNJ906W5BRX LED. It provides the product's absolute maximum ratings, electro-optical characteristics, lighting color, conventional part number, global part number, lens color, forward voltage, wavelength, forward current, luminous intensity, relative luminous intensity, duty cycle, pulse width, ambient temperature, etc.

File format: PDF Size:25 KB