intersil Manuals (Industrial)

The HIN202, HIN206, HIN207, HIN208, HIN211, HIN213 are a family of +5V powered RS-232 transmitters/receivers with 0.1 microfarad external capacitors. This family of RS-232 transmitters/receivers interface circuits meet all ElA RS-232E and V.28 specifications, and are particularly suited for those applications where ±12V is not available. They require a single +5V power supply and feature onboard charge pump voltage converters which generate +10V and -10V supplies from the 5V supply. The family of devices offers a wide variety of RS-232 transmitter/receiver combinations to accommodate various applications (see Selection Table). The HIN206, HIN211 and HIN213 feature a low power shutdown mode to conserve energy in battery powered applications. In addition, the HIN213 provides two active receivers in shutdown mode allowing for easy “wakeup” capability. The drivers feature true TTL/CMOS input compatibility, slew rate-limited output, and 300Ω power-off source impedance. The receivers can handle up to ±30V input, and have a 3kΩ to 7kΩ input impedance. The receivers also feature hysteresis to greatly improve noise rejection.

File format: PDF Size:487 KB

The HI-546, HI-547, HI-548, and HI-549 are analog multiplexers with active overvoltage protection and guaranteed rON matching. These devices allow analog input levels to exceed the power supply without damage or signal path disturbance. They feature active protection circuitry to maintain signal fidelity even under fault conditions. The analog inputs can withstand constant 70VP-P levels with ±15V supplies, while the digital inputs can sustain continuous faults up to 4V greater than either supply. The devices also provide protection against short-circuiting in case of multiplexer supply loss. The HI-546 is a single 16-channel device, the HI-547 is an 8-channel differential device, the HI-548 is a single 8-channel device, and the HI-549 is a 4-channel differential device. These devices are suitable for systems where the analog inputs come from external equipment or separately powered circuitry. They are fabricated with 44V Dielectrically Isolated CMOS technology. The HI-506/507/508/509 multiplexers are recommended for applications that do not require input overvoltage protection. For more information, refer to Application Notes AN520 and AN521. MIL-STD-883 compliant parts are available upon request for the HI-546/883.

File format: PDF Size:529 KB

This datasheet introduces the HI5660 8-bit, 125MSPS, high speed D/A converter's features.

File format: PDF Size:220 KB

The HS-3530RH is a Low Power, Radiation Hardened Programmable Operational Amplifier from Intersil Corporation.

File format: PDF Size:110 KB

The HS-3530ARH is a radiation-hardened programmable low power op-amp with a wide range of performance specifications. It is designed for space radiation environments and offers constant operating characteristics and wide supply voltage range. It is primarily used in active filtering and signal conditioning applications.

File format: PDF Size:29 KB

HS-2700RH is radiation hardened internally compensated operational amplifiers which employ dielectric isolation to achieve excellent DC and dynamic performance with very low quiescent power consumption

File format: PDF Size:92 KB

File format: PDF Size:0 KB

The HS-2520RH is a radiation hardened monolithic operational amplifier which delivers an unsurpassed combination of specifications for slew rate, bandwidth and settling time. This dielectrically isolated amplifier is designed for closed loop gains of 3 or greater without external compensation. In addition, this high performance component also provides low offset current and high input impedance.

File format: PDF Size:80 KB

HS-4424RH and HS-4424BRH are bipolar CMOS devices constructed with Intersil's dielectrically isolated Rad Hard Silicon Gate (RSG) BiCMOS process. They provide high current output, low power consumption and high reliability.

File format: PDF Size:55 KB

The ICL7660S Super Voltage Converter is a monolithic CMOS voltage conversion IC that guarantees significant performance advantages over other similar devices. It is a direct replacement for the industry standard ICL7660 offering an extended operating supply voltage range up to 12V, with lower supply current. No external diode is needed for the ICL7660S. In addition, a Frequency Boost pin has been incorporated to enable the user to achieve lower output impedance despite using smaller capacitors. All improvements are highlighted in the Electrical Specifications section. Critical parameters are guaranteed over the entire commercial, industrial and military temperature ranges. The ICL7660S performs supply voltage conversion from positive to negative for an input range of 1.5V to 12V, resulting in complementary output voltages of -1.5V to -12V. Only 2 non-critical external capacitors are needed for the charge pump and charge reservoir functions. The ICL7660S can be connected to function as a voltage doubler and will generate up to 22.8V with a 12V input. It can also be used as a voltage multiplier or voltage divider. The chip contains a series DC power supply regulator, RC oscillator, voltage level translator, and four output power MOS switches. The oscillator, when unloaded, oscillates at a nominal frequency of 10kHz for an input supply voltage of 5.0V. This frequency can be lowered by the addition of an external capacitor

File format: PDF Size:80 KB

This document provides the dimensional information of M24.173B 24 LEAD THIN SHRINK SMALL OUTLINE EXPOSED PAD PLASTIC PACKAGE.

File format: PDF Size:39 KB

The HC-5524 is a 24V PABX SLIC with 25mA loop feed. It is manufactured using a Dielectric Isolation (DI) process and is designed to serve as a 24V interface between the traditional telephone subscriber pair (Tip and Ring) and the low voltage filtering and coding/decoding functions of the line card. The SLIC provides various BORSCHT functions including battery feed with subscriber loop current limiting, overvoltage protection, ring relay driver, supervisory signaling functions, hybrid functions (with external Op-Amp), and test (or battery reversal) relay driver. Additionally, it offers selective denial of power to subscriber loops, programmable subscriber loop current limit, thermal shutdown with alarm output, and line fault protection. The HC-5524 SLIC is suitable for line card designs in PBX and DLC systems, serving as a replacement for traditional transformer solutions.

File format: PDF Size:90 KB

The HC4P5509A1R3060 telephone Subscriber Line Interface Circuit integrates most of the BORSCHT functions on a monolithic IC. The device is manufactured in a Dielectric Isolation (DI) process and is designed for use as a high voltage interface between the traditional telephone subscriber pair (Tip and Ring) and the low voltage filtering and coding/decoding functions of the line card. Together with a secondary protection diode bridge and “feed” resistors, the device will withstand 1000V lightning induced surges, in plastic packages. The SLIC also maintains specified transmission performance in the presence of externally induced longitudinal currents. The BORSCHT functions that the SLIC provides are: • Battery Feed with Subscriber Loop Current Limiting • Overvoltage Protection • Ring Relay Driver • Supervisory Signaling Functions • Hybrid Functions (with External Op Amp) • Test (or Battery Reversal) Relay Driver In addition, the SLIC provides selective denial of power to subscriber loops, a programmable subscriber loop current limit from 20mA to 60mA, a thermal shutdown with an alarm output and line fault protection. Switch hook detection, ring trip detection and ground key detection functions are also incorporated in the SLIC device. The HC4P5509A1R3060 SLIC is ideally suited for line card designs in PBX and CO systems, replacing traditional transformer solutions.

File format: PDF Size:65 KB

The HC-5509A1 telephone Subscriber Line Interface Circuit integrates most of the BORSCHT functions on a monolithic IC. The device is manufactured in a Dielectric Isolation (DI) process and is designed for use as a high voltage interface between the traditional telephone subscriber pair (Tip and Ring) and the low voltage filtering and coding/decoding func- tions of the line card. Together with a secondary protection diode bridge and “feed” resistors, the device will withstand 1000V lightning induced surges, in plastic packages. The SLIC also maintains specified transmission performance in the presence of externally induced longitudinal currents. The BORSCHT functions that the SLIC provides are: • Battery Feed with Subscriber Loop Current Limiting • Overvoltage Protection • Ring Relay Driver • Supervisory Signaling Functions • Hybrid Functions (with External Op-Amp) • Test (or Battery Reversal) Relay Driver In addition, the SLIC provides selective denial of power to subscriber loops, a programmable subscriber loop current limit from 20 to 60mA, a thermal shutdown with an alarm out- put and line fault protection. Switch hook detection, ring trip detection and ground key detection functions ar

File format: PDF Size:130 KB

This document introduces the features and characteristics of Intersil SLIC

File format: PDF Size:145 KB

This datasheet provides detailed information about the HC-5504B1, including its specifications, features, and applications.

File format: PDF Size:88 KB

This file introduces the features and characteristics of Intersil HC-5502B EIA/ITU PABX SLIC with 30mA Loop Feed.

File format: PDF Size:87 KB

This datasheet provides detailed information on the features and functionality of the Intersil HC-5502B1 SLIC Subscriber Line Interface Circuit.

File format: PDF Size:133 KB

HC-55564/883 is a half duplex modulator/demodulator CMOS integrated circuit used to convert voice signals into serial NRZ digital data and to reconvert that data into voice. The conversion is by delta-modulation, using the Continuously Variable Slope (CVSD) method of modulation/demodulation. While the signals are compatible with other CVSD circuits, the internal design is unique. The analog loop filters have been replaced by very low power digital filters which require no external timing components. This approach allows inclusion of many desirable features which would be difficult to implement using other approaches. The fundamental advantages of delta-modulation, along with its simplicity and serial data format, provide an efficient (low data rate/low memory requirements) method for voice digitization. The device may be easily configured with the National TP3040 PCM/CVSD filter. The HC-55564/883 is usable from 9k bits/sec to above 64kbps. For more applications information, see Application Notes AN576 and AN607.

File format: PDF Size:82 KB

RF3V49092, RF3S49092SM are 20A/10A, 12V logic level complementary power MOSFETs manufactured using an advanced MegaFET process. They offer outstanding performance and are designed for applications such as switching regulators, switching converters, motor drivers, relay drivers, and low voltage bus switches. These MOSFETs achieve full rated conduction at a gate bias in the 3V to 5V range, enabling true on-off power control directly from logic level (5V) integrated circuits.

File format: PDF Size:245 KB