ATMEL Manuals (Industrial)

The document introduces the features of the FX6805 floating-point calculator.

File format: PDF Size:1221 KB

The TS68332 is a 32-bit microcontroller that features low power and has a special STOP mode. It operates at 5V±10% supply and 20.97MHz, which is software programmable at 5V±5%. The device uses 1µ high density complementary metal oxide semiconductor (HCMOS) static design and 132-pin ceramic lead chip carrier (CERQUAD) and 132-pin ceramic pin grid array (PGA) package.

File format: PDF Size:1467 KB

TS68332 is a low-power 32-bit microcontroller, running at 16.78MHz, working voltage is 5V±10%, using 1µHCMOS process, using static design.

File format: PDF Size:1467 KB

File format: PDF Size:1467 KB

This document is a technical manual for the TS68000/TS68008 processor, which supports 16-bit or 8-bit, and has an independent direct memory access controller, interrupt controller, parallel input/output ports, 1152 bytes of usable dual-port random-access memory, three timers, including a watchdog timer, four programmable chip-select lines with wait-state logic, programmable address mapping of dual-port RAM and IMP registers, on-chip clock generator with an output clock signal, system control register, bus arbitration logic with low interrupt latency support hardware watchdog for monitoring bus activity, low power (standby) modes, disable CPU logic (TS68000), freeze control for debugging selected on-chip peripherals, DRAM refresh controller.

File format: PDF Size:1127 KB

This file introduces the features of the TS68000/TS68008 microprocessor chip, including the TS68000/TS68008 microprocessor core, system integration block, and communications processor.

File format: PDF Size:1127 KB

The TS68040 is Atmel’s third generation of 68000-compatible, high-performance, 32-bit microprocessors. The TS68040 is a virtual memory microprocessor employing multiple, concurrent execution units and a highly integrated architecture to provide very high performance in a monolithic HCMOS device. On a single chip, the TS68040 integrates a 68030-compatible integer unit, an IEEE 754-compatible floating-point unit (FPU), and fully independent instruction and data demand-paged memory manage- ment units (MMUs), including 4K bytes independent instruction and data caches. A high degree of instruction execution parallelism is achieved through the use of multi- ple independent execution pipelines,

File format: PDF Size:1381 KB

The TS68040 is Atmel's third generation of 68000-compatible, high-performance, 32-bit microprocessors. The TS68040 is a virtual memory microprocessor employing multiple, concurrent execution units and a highly integrated architecture to provide very high performance in a monolithic HCMOS device. On a single chip, the TS68040 integrates a 68030-compatible integer unit, an IEEE 754-compatible floating-point unit (FPU), and fully independent instruction and data demand-paged memory management units (MMUs), including 4K bytes independent instruction and data caches. A high degree of instruction execution parallelism is achieved through the use of multiple independent execution pipelines.

File format: PDF Size:1440 KB

TS68040 is a high-performance 32-bit microprocessor with 26-42MIPS integer performance and 3.5-5.6MFLOPS floating-point performance.

File format: PDF Size:1368 KB

File format: PDF Size:0 KB

The TS68020 is the first full 32-bit implementation of the TS68000 family of microprocessors. It is implemented with 32-bit registers and data paths, 32-bit addresses, a rich instruction set, and versatile addressing modes.

File format: PDF Size:1229 KB

TS80C31X2 8-bit CMOS Microcontroller ROMless

File format: PDF Size:288 KB

File format: PDF Size:0 KB

1078 Series 1-Inch Diameter Steel Door Magnetic Contacts

File format: PDF Size:71 KB

U2896B is a modulation PLL for GSM, DCS and PCS systems. The device integrates a mixer, an I/Q modulator, a phase-frequency detector (PFD) with two synchronous programmable dividers, and a charge pump. The U2896B is designed for cellular phones such as GSM900, DCS1800, and PCS1900, applying a transmitter architecture at which the VCO operates at the TX output frequency. No duplexer is needed since the out-of-band noise is very low. The U2896B exhibits low power consumption. Broadband operation provides high flexibility for multi-band frequency mappings. The IC is available in a shrinked small-outline 36-pin package (SSO36).

File format: PDF Size:215 KB

The AT25080/160/320/640 series is AT25 series 8-bit serial electrically erasable programmable read only memory (EEPROM) with 8192/16384/32768/65536 bits, organized as 1024/2048/4096/8192 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low power and low voltage operation is required.

File format: PDF Size:128 KB

The document introduces a high-performance and low-power AVR 8-bit RISC architecture product. It features 118 powerful instructions, most of which can be executed in a single cycle. It has 32 general-purpose working registers and can achieve up to 8 MIPS throughput at a clock frequency of 8 MHz. The product also includes 2K/4K bytes of in-system programmable flash, 128 bytes of SRAM, and 128/256 bytes of in-system programmable EEPROM. It also includes a 8-bit timer/counter, an expanded 16-bit timer/counter, an on-chip analog comparator, a programmable watchdog timer, and a programmable UART.

File format: PDF Size:177 KB

AT24C512SC is a serial electrically erasable and programmable read-only memory (EEPROM) with the features of low power and low voltage operation. It provides 524,288 bits of storage space organized into 65,536 words of 8 bits each. This device is suitable for smart card applications, with high reliability and compatibility.

File format: PDF Size:228 KB

The AT87F51 is a low-power, high-performance CMOS 8-bit microcomputer with 4K bytes of QuickFlash Programmable Read Only Memory. The device is manufactured using Atmel’s high density nonvolatile memory technology and is compatible with the industry standard MCS-51™ instruction set and pinout. The on-chip QuickFlash allows the program memory to be user programmed by a conventional nonvolatile programmer.

File format: PDF Size:174 KB

AT49BV040 is a 4M-bit single-voltage 2.7-volt Battery-Voltage™ flash memory with the following features: Single voltage for read and write: 2.7V to 3.6V (BV), 3.0V to 3.6V (LV), Fast read access time - 120 ns, Internal program control and timer, 16K bytes boot block with lockout, Fast chip erase cycle time - 10 seconds, Byte-by-Byte programming - Typical 30µs/Byte, Hardware data protection, DATA polling for end of program detection, Low power dissipation - 25 mA active current - 50µA CMOS standby current, Typical 10,000 write cycles, Small packaging - 8 x 8 mm CBGA - 8 x 14 mm V-TSOP.

File format: PDF Size:214 KB