Key facts
- Brand
- Phoenix Contact
- Model
- 5-PE
- Category
- Other device
- Documents
- 3
- Languages
- EN
- Last added
- 2012-05-10
Start here
Phoenix Contact ST 2.5-PE/3L Four-Level Spring Cage Motor Terminal Block Handbook
The ST 2.5-PE/3L is a four‑level spring cage motor terminal block designed for compact wiring of three‑phase loads. It features three feed‑through levels and a PE connection that snaps onto a mounting rail, with each terminal point capable of being labeled and equipped with a 2.3 mm test connector.
The handbook lists technical data such as maximum load current, surge voltage, dimensions, insulating material, and approval information (UL, CSA/CUL). It also details accessories like end covers, test connectors, screwdriver, and labeling strips (Zack strips) for outer grooves and the terminal centre.
Phoenix Contact 5-PE specifications
| Maximum load current / cross‑section | 26 A / 4 mm² |
|---|---|
| Rated surge voltage / contamination class | 8 kV / 3 |
| Width / length / end cover width | 5.2 mm / 98.5 mm / 2.2 mm |
| Height | 73.5781 mm |
| Insulating material | PA |
| Inflammability class | UL 94‑70 |
Source: Phoenix Contact ST 2.5-PE/3L Four-Level Spring Cage Motor Terminal Block Handbook
All Phoenix Contact 5-PE documents by type
Ratings, dimensions and ordering codes, for selection and design work.
Questions answered in these manuals
What is the maximum load current of the ST 2.5-PE/3L terminal block?
It can carry up to 26 A with a cross‑section of 4 mm².
From: Phoenix Contact ST 2.5-PE/3L Four-Level Spring Cage Motor Terminal Block Handbook
What are the physical dimensions of the terminal block?
The block is 5.2 mm wide, 98.5 mm long, 2.2 mm end‑cover width, and 73.5781 mm high.
From: Phoenix Contact ST 2.5-PE/3L Four-Level Spring Cage Motor Terminal Block Handbook
What is the nominal current rating of the QTC 2,5-PE?
The terminal block is rated for a nominal current of 24 A.
What voltage can the QTC 2,5-PE handle?
It is rated for a nominal voltage of 800 V.
What type of connection does the UT 2,5-PE terminal block use?
It uses a screw connection.
What is the rated surge voltage for this terminal block?
The rated surge voltage is 8 kV.