Key facts
Start here

Dell Latitude E7450 Notebook Owner's Manual
This document serves as the Owner's Manual for the Dell Latitude E7450 notebook computer. It covers essential procedures for working inside the computer, such as turning it off safely, docking it with a station, and performing maintenance tasks like removing the battery or base cover. The guide includes detailed step-by-step instructions for removing and installing various internal components, including the hard drive, memory, display, and system board. This manual is written in Chinese.
Read onlineDell Latitude E7450 specifications
| Chipset | Wildcat Point LP |
|---|---|
| DRAM bus width | 64-bit |
| Flash EPROM SPI | 32 Mbits, 64 Mbits |
| PCIe bus frequency | 100 MHz |
| DMI frequency | 5GT/s |
| Processor Types | Intel Core i3 / i5 / i7 |
| L3 cache | 3 MB, 4MB, 6 MB, and 8 MB |
| Memory connector | Two SODIMM slots |
| Memory capacity | 2GB, 4GB, or 8GB |
| Memory type | DDR3L SDRAM (1600 MHz) |
| Minimum memory | 2 GB |
| Maximum memory | 16 GB |
| Audio Controller | Latitude E7250/E7450 Realtek ALC3235 |
| Touchpad Active Area X-axis | 99.5 mm |
| Touchpad Active Area Y-axis | 53.0 mm |
| Battery Type | 3-cell Lithium Polymer battery with ExpressCharge |
| Battery Type | 4-cell Lithium Polymer battery with ExpressCharge |
| Battery Voltage (3-cell) | 11.10 VDC |
| Battery Voltage (4-cell) | 7.40 VDC |
| AC Adapter Input voltage | 90 VAC to 264 VAC |
All Dell Latitude E7450 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Disassembly, diagnostics and part numbers, for repair.
Questions answered in these manuals
What tools are required to remove and install components?
The procedures may require a small flat-blade screwdriver, a Phillips screwdriver, and a small plastic scribe.
Can I use a battery designed for other Dell computers?
No, you must use only the battery designed for this particular Dell computer to avoid damage.
What tools are recommended for component removal?
The document recommends a small flathead screwdriver, a Phillips screwdriver, and a pointed plastic object.
Can the docking station be used with other Dell models?
No, the docking station can only be used with Latitude E7250 / Latitude E7450 models.
What tools are required for removing and installing components?
The procedures may require a small flat-blade screwdriver, a Phillips screwdriver, and a small plastic scribe.
Can I use batteries designed for other Dell computers?
No, you must use only the battery designed for this particular Dell computer to avoid damage.
