This operation manual covers safety, setup, operation, adjustments, maintenance, and technical specifications for the Molex WS-1000 Pneumatic Bench Top Wire…
The Molex WS-1000 is a semi-automatic, pneumatic table instrument designed for stripping cables and wires with various insulations, including rubber, PUR, and Teflon. It features self-centering clamping jaws, sensor release for the stripping process, and the ability to handle extremely short wire leads less than 9mm in length. The machine allows for quick adjustment of wire strip diameter settings and V-shaped blade changes without tools.
| Width | 95.0mm (3.74") |
|---|---|
| Depth | 280.0mm (11.02") |
| Height | 165.0mm (6.50") |
| Weight | 4.3kg (9.5lbs) |
| Cycle Time | 0.5 seconds |
| Operating Air Pressure | 3 to 6 bar (43 to 87psi) |
| Sound Level | < 70 dB(A) |
| Cable Round cables | up to 5.0mm (.196") O.D. |
| Cross section | 0.15 - 4mm² (26 - 12 AWG) |
| Flat cables | up to 8mm wide (.315") |
The maximum operating pressure is 6 bar (87 PSI). Operating the tool above this pressure may cause injury or damage.
Yes, the machine can handle extremely short wire leads, less than 9mm in length.
A metric standard hex wrench set, an adjustable wrench, and a wire stripper/cutter are recommended.