Molex Putt Pump PPHHLS-CS hydraulic head crimper operation manual for 8 to 4/0 AWG insulated and uninsulated terminals and splices.
The Molex Putt Pump Hydraulic Head Crimper, engineering number PPHHLS-CS and order number 19286-0117, is designed to crimp 8 to 4/0 AWG insulated and uninsulated terminals and splices. The document is an operation manual covering safety warnings, general description, setup and adjustments, terminal specifications and crimping operation, preventive maintenance, parts lists, assembly drawings, and troubleshooting.
Technical information in the manual includes a 100 PSI (6.9 Bars) supply pressure with a 125 PSI (8.6 Bars) maximum, a 15-second cycle time, and an optional C-Frame stand for bench mounting.
| Crimping capacity | 8 to 4/0 AWG insulated and uninsulated terminals and splices |
|---|---|
| Supply pressure | 100 PSI (6.9 Bars); 125 PSI (8.6 Bars) maximum |
| Cycle time | 15 seconds |
| Air supply | 20 CFM (550 L/M) at 100 PSI (6.9 Bars) |
| Maximum hydraulic capacity | 10,000 PSI |
It is designed to crimp 8 to 4/0 AWG insulated and uninsulated terminals and splices.
The manual lists 100 PSI (6.9 Bars) supply pressure and a 125 PSI (8.6 Bars) maximum.
It includes the hydraulic head crimper tool, the pump assembly with hoses, filter, regulator, and gauge assembly, and the instruction manual.
Check for a low oil level and replenish the oil reservoir.