Operating instructions and safety guidelines for FLAGRO FVO-200RC indirect-fired space heaters used in construction sites.
This manual provides detailed operating instructions and safety precautions for the FLAGRO FVO-200RC indirect-fired space heater, designed for temporary heating in construction environments. It covers installation, fuel and electrical requirements, combustion air adjustments, startup and shutdown procedures, and maintenance tasks. Safety warnings emphasize fire, explosion, and carbon monoxide hazards, and specify clearances from combustibles and prohibited uses.
The heater operates on No.1, No.2, diesel, or kerosene fuel and requires a 115V 15A electrical supply. Installation must comply with CSA and UL standards, including proper flue venting and clearance requirements. Maintenance includes regular inspection of hoses, filters, and components, with specific replacement intervals for parts like the fuel filter and nozzle.
| Model | FVO-200RC |
|---|---|
| Input | 185,000 BTUH |
| Fuel | No.1, No.2, diesel or kerosene |
| Fuel Pressure | 180 psi |
| Nozzle | 1.10 x 70A |
| Electrical | 115V 15 AMP |
| Ignition | Direct Spark Ignition |
| Air Circulation | 2600 cfm |
| Fuel Consumption | 1.30 Gal/hr |
| Approved | cETLus listed |
The heater operates with No.1, No.2, diesel, or kerosene fuel.
The heater requires a 115V 15A electrical supply.
The fuel consumption rate is 1.30 gallons per hour.
The manual includes warnings about fire, burn, inhalation, explosion, carbon monoxide poisoning, and electrical shock hazards.